Water stop start stop start then lights 3578 come on and continues to beep

You need to supply brand and model numbers in the question itself when posting.


https://www.ifixit.com/Answers/View/116311/Why+does+my+washer+stop+half+way+through+cycle

https://diy.stackexchange.com/questions/21181/what-could-cause-my-washing-machine-to-stop-before-the-rinse-cycle

http://www.whitegoodshelp.co.uk/washing-machine-sticks-stops-mid-cycle/

http://appliances.wonderhowto.com/how-to/fix-your-front-load-washer-if-stops-mid-cycle-381047/

Have you checked the lint has been cleaned off filter and water reservoir emptied.?

Have you tried to see if your plug or connections are loose?

Need to know the error code to help you. When it beeps, take note of the top row of lights & count from right to left. Tell me exactly which lights are on & which are off. Also, tell me if any other lights are blinking. The only thing the tiler would of disconnected are the inlet water hoses. Check that the hose from the cold tap is on the cold inlet & hot tap is on the hot inlet. Marked C & H on back of panel.

Is there a sequence to the beeps?

I have the same problem, just checked the switch and its all ok. But the machuine also stops and starts when its trying to empty after the last rinse cycle to start the spin cycle. Starts to drain then stops and repeats, it does empty some without stopping but starts to go silling when its nearly empty?

Refer the user guide for the error message meaning. Contact service provider.

Before that make sure that the water supply to the inlet is having free flow.

Out of balance switch could be faulty/ coroded.
have a gw 709 and it had the same problem, out of balance switch had jammed on

More than likely you need to replace the washer control panel.

have got a bauknecht gsx4756 which when started beeps continually and start light flashes. it automaticaly then flashes the rinse button as well. I have reset holding down start and mode selection button next to the start button the fault keeps recurring. just wanting to know what the problem is before paying an engineers extortionate call out fees