Keypad unlock on motorola q9c

press *** on the keypad, then enter from the softkey. If the phone keypad was accidently locked you can unlock it without a pw, but if was intentionally locked with a pw the only way to unlock it is either with a pw or to factory reset the phone

If you want to unlock your Motorola Moto Q9c mobile phone from the network lock,I would suggest you to get an unlock code from Unlock Zone Unlocking the Motorola MOTO Q9C mobile phone at reasonable price and unlock it using the unlocking instructions given for your mobile phone from Mobile Unlock Guide .

There is only one option to unlock Motorola Moto Q if you forgot the password, you must do hard reset your motorola. But this method will erase all your data in your phone after your motorola unlocked. If you sure doing this just follow a few step below:
1. Power off the Motorola Q
2. Power on the Motorola Q while pressing and holding center button and power button.
3. Keep holding until you get a "Master Reset?" screen.
4. Click the left softkey for "Yes" and the phone will wipe and reload the OS from ROM

1. Press **# in order to unlock Network Configuration on the phone.
2. Press Settings.
3. Press 3 on the keypad (or scroll down) for Network Configuration.
4. Press 33 on the keypad (or scroll down) for Erase Configuration.
5. Press the Yes softkey.
6. Press the Save softkey.

To unlock
Have you tried the '*' key , then the right-hand softkey to 'Unlock'
to lock and unlock the keypad should be the same key combinations.

maybe or the wrong program but try the smart card sim is the best look on the internet

If it is lock it's because the owner would like to have it back on to Verizon and they will know the owner!

To unlock the device keypad:
1. Press Unlock (left softkey, this is the key directly under the screen on the left with a dot on it).
2. When the unlock screen displays, press the "*" key. ( this is the "A" key without the "alt")

To Lock your phone
Hold down the # symbol on your phone until it says: "Phone Keypad is now Locked"

To Unlock your phone
The screen should now read in the bottom right hand corner "Unlock". press the corresponding key. It then asks "Unlock Keypad?" "Yes" or "No". Select Yes and press Menu button (also the play/pause button).

Hope this helps you all!

Unlocking a Cisco 7940

Method 1:
1) Unplug the phone
2) Plug the phone back in while holding the # key
The phone will soon display “Reset key sequence detected”
3) After several lights flash press the following keys in order:
1 2 3 4 5 6 7 8 9 * 0 #
4) The phone will then ask you if you want to save the network configurations:
Save network cfg? 1=yes 2=no
5) The phone will soon display “Factory reset initiated” and will continue
through the boot up process.
If that process fails to work for some reason there
is a second method.

Method 2

Complete these steps:

1. Press Settings.
2. The Network Configuration lock symbol must be unlocked. If not, exit to the main window and press ** # again.
3. Press 3 on the keypad (or scroll down) for Network Configuration.
4. Press 33 on the keypad (or scroll down) to Erase Configuration.
5. Press the Yes softkey.
6. Press the Save softkey.

The phone will now be reset.

Also see this link
http://www.cisco.com/univercd/cc/td/...tain.htm#93250