Need a code for universal cox cable remote to turn on and off Kenwood KR-V-8040 Receiver

• DIRECTV - 10178
• Time Warner Cable - 0178
• Philips - 0002
• Comcast - 11864 or 10178
• Cox Communications - 0178
• Atlas DVR Device URC - 0178
• Bell Remotes & Dish Network - 006,363,505, 506, 516, 523, 526, 566, 573, 612, 627, 647, 652, 653, 654, 655, 656, 658, 659, 664, 665, 667, 669, 670, 679, 680, 704, 717, 730, 738

Hi Gw, my name is Mike Houston a Social Media Representative at DISH. I understand you want to program your innvoage remote to our DISH receiver. When we send out our DISH receivers we will include our own DISH universal remotes that can control many different components like; HDTV, surround sound receivers and sound bars. We do not have the codes for other universal remotes to work with our system. I will provide you a link explaining in more detail on programming your remote: http://www.ehow.com/way_5501311_innovage-jumbo-universal-remote-instructions.html

For Universal Remote Control brands listed below, please use accompanying codes and refer to your Universal Remote Control UserManual for basic Instruction for changing TV code to operate the TV model.
Codes for DIRECTV: 0178, 10178
Codes for Time Warner Cable: 0178, 10178
Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775

Seiki is 0001 remote code

Hi my name is Mike Houston of DISH Network and I see you're trying toprogram the Innovage Jumbo remote to the DISH receiver. The best way would beto use the DISH Network remote and have all units programmed to our remote,however if you want the universal remote programmed to the DISH receiver thefirst thing you want to do is press the Code Search button for 5 seconds, whenthe Red Light is on release the Code Search button and keep pressing the ShutDown button until the unit turns off. When it turns off press Enter to lock itin.

Hi terryself my name is Mike Houston of DISH Network I was going over your post andseen where you have a universal remote and changed the batteries. When usinganother remote besides our DISH Network remote you will need to get the codesoff the paper work that came with the universal remote. I would be more thanhappy to look at your account to send out one our DISH Network remotes; I willsend you my e-mail so you can contact me directly. [email protected]

We would be happy to help with that. Here is a list of someof the codes that we have for your Kenwood Receiver: 774, 795, 668, 691, 728, and 745.

Press and hold the AUX mode button until all mode buttons at the top of theremote come on, then release. Enter the number 2 then one of the codes for your Kenwood Receiver provided above. Press the pound (#) button, the mode light should flashthree times. Check that the code works by trying several different functions onthe remote to make sure it will properly operate your Kenwood Receiver. Keep in mindthat some codes may not be compatible with your equipment. If this is the case,please try the other codes listed for that device until you find one that iscompatible with your equipment.

We hope this helps you, and thank you for being a valued DISH Network Customer!


Phillip Chang
DISH Network Customer Service Representative

Denon AVR - 788
Code for DirecTV remote RC64
The code I have found for this one is 31360 and maybe 31104.

If you are a DirecTV or Cox subscriber, you may sync a universal remote to your television using code 1548 or 11548.

These codes are for use with the following Coby television models:
TFTV1022, TFTV1212, TFTV1513, TFTV1514, TFTV1524, TFTV1913, TFTV1923, TFTV2214, TFTV2224, TFTV2617, TFTV3217, TFTV3717, TFTV4717

If the codes do not work, or if you are not a DirecTV or Cox customer, the universal remote control manufacturer is responsible for creating and embedding a Coby-compatible code in the remote control. Please contact your cable carrier or the universal remote control manufacturer for assistance.