I am also in need of a motor control board for the Cardiozone Superpersport Club ll non folding.

Your controller is shot. Replace your controller

see the video and proceed according. God bless you



2) LUBE the rollers bearings too
3) test the drive belt motor, and replace it
4) Test the input voltage motor, if there are the motor need repair, see my personal TIPS for help
5) Test the output voltage board, for input voltage motor, if there are NOT THE board is faulty. see the block d.
God bless you

buy it from www. fitnessrepairparts.com
God bless you

If the console takesbatteries, replace them. If this does not work or your console does not requirebatteries, check the reed switch or optic sensor. Reed Switch:Unplug the treadmill and remove the motor hood cover. The reed switch is mountedon the frame next to the front roller pulley. There is a magnet glued into thefront roller pulley. When adjusting the reed switch, make sure it is pointingdirectly at the magnet. Move the tip of the reed switch within 1/8" of themagnet. Also, check to see that the wire is not damaged, and is connected tothe console. 2nd Step: tight the keypanel vs Display board and clean with contact cleaner spray . Tight the connector from Display Board vs Main Motor Board.

See the block diagram how the main motor board has aprox 90% functions in any treadmill. Good luck, Now you will strong resultant in determine what is faulty.

Dear Sir:

The best way is to go to the company, and they can resolve your problem.

Otherwise you will be lose your time. Remember the factory has many options with the manufacturer of the screen, and gave the o.k for your equipment.

sincerely

Hi,
Sounds like the motor control board went wacko.....ran the incline motor all the way up and shut down the treadmill motor for no reason....sounds like a control board problem...

heatman101

Your problem might be that a magnet has fallen off. Here's an illustrated guide which should make fixing it easy: http://fixmytreadmill.blogspot.com/2010/10/how-to-fix-treadmill-e1-error.html

Good luck.

Go to treadmilldoctor.com or call them@ 1-800-750-4766 since Keys Fitness went out of business they bought the parts inventory I am assuming that they will have manual for you unit.

Unplug your unit, then remove motor shroud . Next step is to locate the motor control board and plug you unit in. Your board should light up with red ,green, or amber L E Ds now manually move the running belt and you should see one of those lights flickers that should tell us the speed sensor is working, if not it needs to be replaced , their maybe other issues, Unplug unit then find the red and black wire that connects the motor to board disconnect them used a simple DC power source like a 9v battery connect them to the motor leads and if the motor armature rotates then all problems point to the motor controll board.

When i turn in my Cardiozone Club Max Hrt. it starts showing SI 2.