Insignia IS-LCDTV32 32 in. Television Logo
Posted on Jun 03, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

My Insignia NS-LCD32 TV won't power on. The remote has good batteries, the outlet has power etc. Insignia says to unplug it it for a few seconds and then plug it back in. I tried that multiple times w

My Insignia NS-LCD32 TV won't power on. The remote has good batteries, the outlet has power etc. Insignia says to unplug it it for a few seconds and then plug it back in. I tried that multiple times with no effect. We did have a power outage last night (I could tell because the lights were blinking 12:03 am), but we have had outages before with no effect to the TV. I've had the tv about a year. The tv won't power on by remote or by depressing the tv power on button. Any suggestions, reasons? Please advsie Rod Yardville NJ

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 814 Answers
  • Posted on Jun 03, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Apr 14, 2009
Answers
814
Questions
0
Helped
447757
Points
1474

The power surges have probably blown the fuse in the power supply board. This may not be the only problem.If you are still under warranty, you will need to have it serviced at a service center. If not You will need to find a repair person or center to open the unit and test it for you. This television and all your electronic equipment should be protected with surge protectors. The reason is your power company has problem with power outages and this will damage your equipment. There is no built in self defense for this equipment due to the huge variants involved with power companies. You should call Insignia and ask them where you can find a authorized service center. You can call the Insignia customer support at this telephone number 1-877-467-4289. Tell them the model number of your television and the problem you have had with its failure to turn on.They will be able to help you find a service center to test and repair your television. I hope this information helps you with your problem.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Where is the location of T CON board on NS LCD32

Cheryl, I will post links to what the T con board looks like so when you remove the rear panel from TV, you will be able to compare and find it easily.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

LCD TV Repair Tutorial Con Board Common Symptoms Solutions How to Replace...

INSIGNIA NS LCD32 Con Board LC320W01 SLA1 6870C 0142B 2L

Amazon com INSIGNIA NS LCD32 CON BOARD CPT 320WF01C SD Electronics
0helpful
1answer

How can I reset my insignia tv #NS-LCD32 to global volume unlock with a RCA universal remote

Try this solution by another user:

timyorba 1 solutions Jul 21, 2011
So, For anybody who doesn't know yet, you do not need the factory remote to restore button functions to your Insignia IS-LCDTV26. All you need to do is program a universal remote that can power on and off the TV, then

"**press the "MUTE" Button 10 times successively**"

and Voila! Unlocked, you should see the status appear in the corner of the TV if everything worked, if not try another tv code or try the manual search function on the remote to find another compatible code set.

0helpful
1answer

Need to setup my tv #NS-LCD32 have no remote

You are going to need an original remote for that set.
0helpful
1answer

Color separation ~ Insignia 32" NS-LCD32

1. Unplug unit from wall for 3 minutes;
2. Press & hold Power button for 1 minute;
3. Plug in unit.
OR:
1. Unplug for 3 minutes.
2. Plug in unit.
3. HOLD Power Button as unit starts ... hold until the unit flickers on then off twice.


This effectively returns the components to factory specs, much like resetting a computer. It offers a *temporary* fix, lasting 45 minutes to hours. All depends on the unit.

Mom has an Insignia 32" with the same color separation problem, which worsens as the day progresses. Best results achieved while television is cold.

Dust in the unit could contribute to the problem ... try to keep the unit dust free as possible.
1helpful
1answer

Insignia NS-LCD32

Most likely either the main board (processes all signal) or even an issue with the power board (supplies wrong voltage somewhere).

In either case not cheap.
0helpful
1answer

Ns-lcd32 won't turn on remotely or manually

Service manual:
http://www.my.electronicshelponline.com/uploads/Insignia_Xoceco_LC-37HV41_NS-LCD37HD-09_LCD_TV_SM.pdf

Check the power supply module.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
1helpful
1answer

Purchased model NS-LCD32 second hand with no

Since you are getting the signal from the satellite, leave the satellite receiver ON and press input on the TV buttons until you get the signal back, wait 2 seconds after pressing the input button. Make sure the TV is on channel 3 if you are using the antenna input.
Let me know if you need further assistance.
4helpful
4answers

Insignia NS-30HTV "Please Wait"

your tv can be repaired get in contact with a tech to look on your set.you are having a problem with your memory chip or eprom ic.good luck
1helpful
3answers

Accidentally locked out of my TV

Unfortunately with this model of Insignia you MUST have the remote that comes with that model number in order to unlock it. Other Insignia remotes won't work. So I have ordered another remote from an online company. Hopefully that will work. I'll probably have to call Insignia to have them walk me through it once the remote arrives.
0helpful
1answer

Insignia NS LCD32 standby light blinking off and on. No Power

I had this problem as well. Actually best buy just left my hosue to fix it. This is the second time they were here to fix it. The first time they said a part was loose. This time they had to replace a part.
Not finding what you are looking for?

1,722 views

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...