Mc1000 back light not working - Symbol Computers & Internet

https://portal.motorolasolutions.com/...BarCode+Scan...

Hi,

Bendix, at one time was a good brand, however, this isn't so these days, as these are manufactured to a standard of dubious quality.

The query you have posted doesn't make sense.

Do you want to know what frequency range these radios will work on?

If so, can anyone reading this post help a friend out?

Cheers,
Peter

MC1000 Mobile Computer Support Downloads Zebra


May have download.

install the mobile device center http://www.microsoft.com/downloads/en/details.aspx?FamilyID=46f72df1-e46a-4a5f-a791-09f07aaa1914&displayLang=en

when the unit is totally drain (main battery and back-up batter is totally drain), you need to charge the device at least 20hrs to fully charge the main and back-up battery check manual of mc1000 re battery charging @ page 21-22

You must disasemble de unit. There is a Ni-Mh 3.6v 15mAh batery inside at the bottom of the unit.

I had a similar problem on an MC75.

I had a back up of the registry, so I restored the backed up registry and it all started to work again.

Hope this helps!

Netty

you kept it in the freezer too long

open the OTL program.

go to 1 - Test Apps
go to 6 - Next Page
go to 1 - Auto Wedge On

do the tests now ;)

Jetts,

As far as I can tell, this is an annoying feature of the scanners. When they do a cold boot, they return to factory settings and wipe any software you have installed. They seem not to wipe things which are reg settings, but anything else is fair game. I think the only solution is to avoid a reset (which means keeping the beastly things charged).

Sorry!