Please turn camera off and turn on again - Panasonic Lumix DMC-FX01 Digital Camera

Then what happened ?

did you try to wait several seconds before turning the camera back on?
When it happens again, after turning off the camera please remove the battery for a few seconds and put it in again. then switch on.
If the problem persists goto the repairshop or your dealer.

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101';'';'
;'

I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.

· Turn off the camera.

· Remove the battery pack.

· Press and hold the power button for 30 seconds.

· Allow the camera to remain without power for 60 seconds.

· Reinsert the battery pack.

· Turn on the camera.

Also tryinitializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settingsSub Menus.

If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

smeone had gifted me panasonic digital cam DCM LZ8 bt when i turn it on an error accurs that please turn off ur camera and then on again
please help

I was having the same problem and contacted Casio. The issue seems to be that there are pictures/video on your internal camera memory which is conflicting with the memory card. Here is the fix:
Turn of the camera and take out your memory card Turn on the camera, click menu, setup, hit the up circle twice and click reset and click reset again until the camera resets
Then click menu again, setup, hit the up circle twice and click format, click format again until the camera formats
(This will delete the pictures from your memory card so make sure you have them saved) Turn off the camera and put your memory card back in, turn the camera on again. Repeat the format process for your memory card and you will be good to go!

This message usually appears when force has been applied to the lens.

The message appears when force has been applied to the lens.

off the camera again and try to open the menu and try to reset it .if the problem persist send it to the survice center

I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.

• Turn off the camera.
• Remove the battery pack.
• Press and hold the power button for 30 seconds.
• Allow the camera to remain without power for 60 seconds.
• Reinsert the battery pack.
• Turn on the camera.

Also try initializing the Camera if you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settings Sub Menus.


If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any further assistance.