LCD monitor hardware solition - Samsung SyncMaster 740N 17" LCD Monitor

How to Fix a LCD Monitor Power Problem: 15 Steps (with ...

www.wikihow.com > ... > Maintenance and Repair

wikiHowHow to Fix a LCD Monitor Power Problem. It is estimated ... Screws can easily getlost, so placing them in noticeable areas is recommended. Some soldering ....

Monitor losing power - Hardware Hangout - Neowin Forums

www.neowin.net > ... > Hardware Hangout

NeowinMay 22, 2012 - I just got a new monitor (Achieva Shimian qh270) and am having an issue with it losing power. My video card is a Sapphire Radeon HD 6870 ...

MOST COMMON REPAIR FOR LCD - NO POWER - YouTube

? 7:42
https://www.youtube.com/watch?v=mH4ZQEQoErw
May 5, 2013 - Uploaded by Tampatec
HOW TO REPAIRING FLAT SCREEN LCD - NO POWERREVIEW FIXING AMERICAN DYNAMICS MONITOR ...

[crt/lcd] problem with LCD monitor losing power - Comp

Sounds like a hardware issue. Make sure your settings on your computer are not causing it.
If its not your settings then it is a hardware issue with the monitor which sadly means you will have to send it to the manufacture or someone who does hardware repair.

Yes, any LCD monitor will work with windows 7 64, but you will need to buy specific hardware to use windows touch etc.

At the Microsoft Windows 7 Hardware Compatibility Center, there are no Xerox monitors that have been determined to be compatible with Windows 7.

Good luck!

Possibly, the CRT monitor was set to a frequency which is too high for the LCD monitor.

Try booting in Safe Mode (press F8 at boot), then set the video for a lower resolution.

Reboot with the new, lower, resolution.

In Control Panel choose Hardware, then Scan for New Hardware and get the LCD monitor recognized.

Then, from the Desktop properties, you will be able to see all resolutions supported by the monitor.

do yuo have an External Monitor to plug in and test ?

Hello,
TFT means Thin Film Trangister. You are using LCD (liquid crystal dispaly) this means in lcd monitor use trangister on/off to create a pixel. you should give your monitor to repair at workshop for this problem. i don't know any workshop which located in your city. and about the expence it's all around rs 600 to 1000.
ok
bye
ramesh

one word clr. let it sit in the solition over nite it will remove scale and deposits. you can find clr at lowes, home depot, walmart, etc.

try this website http://lifehacker.com/software/geek-to-live/make-the-most-of-your-dual-monitors-317479.php

1) Change the flex cable.
2) Reflow or change the LCD EMI filter which is located right next to the LCD connector.