Use splitter cables to double your outputs. The signal strength will be half to each speaker per channel. i.e. if each channel has an output of 100w then splitter cables will give you 4 x 50w to connect up. Aim to use speakers rated below the max output rating of your amp, so in this example 4 x 40w speakers would be safer (won't blow your amp) than 4 x 60w speakers
It is a Behringer EP4000! But is it "possible" without great problem, to connect them, 4 or more Speakers, even one pair on the speakons and another on the binding posts?
(this would be the best way to me!)
Or any other way except "Bridge", Mono or anything else than, the "usual" (but not the "Right Way") 2 in 1, or 2 connections on each output, but having the speakons, i will have to use them, speakers cable i only have 10mtrs
(5mtrs each)so the less powerfull would be narest to me and the 750w a bit more apart!
Thank you.
×
155 views
Usually answered in minutes!
×