Question about Mitsubishi WD-Y57 57" Projection HDTV
Green lights blinks,tries to start,loses power then shuts off
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Here's something that might also be useful. After you turn on the
set, and get the regular red blinky lights, hold down the Device and
Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.
please post your error code
Posted on Dec 19, 2007
generally this means a bad digital module.. as a techinican the first thing that we would check are what is know as standby voltages. if they were there we would replace digital module.! question. Does it blink for more than 70 seconds. This unit comes with a lockout feature. to unlock press and hold menu down for 10 seconds on front panel.
Posted on Jan 08, 2008
There are (4) 1000uf @35V capacitors all together on the DM board that need to be replaced some models have 1000uf @ 16V but they are all right beside each other and all rated at 1000ufs the voltages will be stamped on the capacitor along with the uf ratings.
Posted on Apr 07, 2008
It means your TV needs to reset. Although you have reset it previously, now again reset the TV as per procedure given below:
Please press the SYSTEM RESET button on the front panel with a pointed item such as the point of a ball point pen or end tip of a paperclip.
The TV will turn off and the green LED will flash quickly for about one minute. After the green LED stops flashing, turn on the TV again. The changes you made while the TV was most recently on, before you used the SYSTEM RESET button, may be lost; the changes you made previously, however, are not lost. Only those changes since the last power on may be lost when the system reset button is pressed. All other settings are retained.
TV Reset Menu
Read on-screen warnings before proceeding, as some user data or settings may be erased.
1. Press TV MENU and then 1, 2, 3 to see the RESET SERVICE MENU to reset the TV.
2. Select Reset System Defaults (CAUTION: All settings, except V-Chip, will be reset to the original factory defaults.
Please do rate this solution as FixYa and revert for further assistance.
Posted on Jun 20, 2009
Go to this post. I had the same problem and it was easy to fix...it cost about 26 bucks total and took about 20 minutes start to finish!
Posted on Jul 27, 2009
Tips for a great answer:
Nov 06, 2015 | Panasonic Televison & Video
Jan 07, 2014 | Televison & Video
Jul 15, 2011 | Mitsubishi WS-55819 55" Rear Projection...
Dec 15, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...
Aug 27, 2009 | Sony Playstation 3 (PS3) Console
Jun 20, 2009 | RCA Scenium M50WH187 50" HDTV
Nov 04, 2008 | Compaq Presario SR1120NX 2.66GHZ Tower w/...
Apr 07, 2008 | Mitsubishi WS-55515 55" Rear Projection...
Dec 19, 2007 | Mitsubishi WD-62525 62" Rear Projection...
Nov 11, 2007 | RCA D61W20 61" Rear Projection Television
Aug 22, 2014 | Mitsubishi WD-Y57 57" Projection HDTV
34 people viewed this question
Usually answered in minutes!