E8 code unit drum does not move after the water fill, then E8 CODE ON DISPLAY

E8 - Overload malfunction error. H3 and E8 errors can occur when units are operating in high humidity / high temperature environments. Please check ambient temperature and ensure that temperature is below 90°F.
May 24, 2016

My portable air conditioner is displaying an error code. What ...

https://support.edgestar.com > en-us > articles > 20890770...
About featured snippets•
Feedback

How do you fix error E8 on your air conditioner?

https://www.unlimitedhp.com > how-do-you-repair-err...
E8 is usually caused by overheating and can be resolved by turning off the power to both the interior and outside unit. Homeowners must turn off the air ...

How Do I Fix Error E8 On My Air Conditioner? - Quick Air

https://getquickair.com.au > blog > how-do-i-fix-error-...
Mar 2, 2021 - Air conditioners use error codes to alert you that something is not working accurately. One of these error codes is Error 8.

How to Troubleshoot a Maytag Epic Washer Front Loader Tip Call Maytag for service if any of these procedures doesn't clear the code on the washer display.

Warning Maytag makes several models in the Epic series and operating instructions vary. For model-specific troubleshooting instructions defer to the user manual that came with your machine or contact Maytag support.

Each model in the Maytag's Epic automatic clothes washer series has a computerized processing unit that displays error codes on a digital screen when something goes wrong with the washer. These codes help Maytag service technicians diagnose the unit. If you know the codes, you can troubleshoot the problem yourself, rather than request a service call, possibly fixing the issue yourself and saving you some money in the process.
Long Fill (LF) or Drain Problem (F9E1) Error Code 1.Press the power button to cancel the cycle.
2.Unplug the washer or disconnect power to the outlet its using.
3.Turn the power back on and select the cycle you wanted and press start.
Washer Problem (F--E--) Error Code 1.Press power to end the cycle.
2.Open the door to check for excess water in the drum.
3.Press "RINSE DRAIN & SPIN" if there is still water in the drum to remove that excess water.

Suds Routine (SD) Error Code 1.Open the drum at the end of the wash cycle.
2.Remove the clothes from washer, carefully examining them for damage from the excess suds issues.
3.Review your detergent uses to ensure that you're using the recommended type of detergent and the correct amount as stated on the product's instructions.

that is a very good question
i cant find a "distributary valve" for sale

lots of water inlet valves hot and cold single units


almost every dishwasher user manual and has code e8 mentioned and faulty distributary valve

why the fault
.If the distributary valve have worked for 150
seconds, and could not reach right
position during wash cycle,after the cycle is finished, the dishwasher will shut off all
loads, the alarm buzzer will ring for 30 seconds and the window will display "E8" at rate
of 1Hz in 30 seconds, and then display "E8" , drain water for 2 minutes meanwhile

hot water form the house takes less power to bring up to machine temperature so by hooking it to cold water will increase the power consumption
call a service center and get the explanation for the error codes and that will explain what is faulty
you didn't mention the make and model of the unit and every error code appears different
for example in a fulgor milano machine code 8 is failure of orientation of distributary valve ===causes open circuit or break of distributary valve
for hoover nextra e8 is dishwasher has failed to heat with water in a reasonable time or has failed to detect the water heating element===causes check water heating element/wiring--check wiring to main control module
go google and type in-- dishwashing machine error code 8-- and see if there is any site for your machine to get the error code and causes
other than that get in a service technician for a correct diagnosis and fix

Hi dear. You did not mention what fault code but regards rest of your information, I would say 3 factors play up with it.
1- Tacho generator or it's plug faulty on motor
2- Motor Carbon brushes worn out or
3- Power/control unit ELP151-KD faulty.
I can advised to contact your local Miele center to diagnose your machine.Thanks.

if you do not have an instruction manual for this washer then download from this site.
http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Hotpoint/Laundry/WMF560UK_19507120302_UK.pdf

If the drum is not moving then it is very likely the pressure switch is also faulty. This tells the control that water level has been achieved. It is thinking water is not coming in.

Check this out.
PRESSURE SWITCH

I don't see a error code E8 listed.. I take it your tried unplugging unit for at least 30 minutes then reconnecting unit. Could be a bad controller or display. If unit hasn't been serviced in a long time.. it should be checked for proper coolant levels and leaks.

You can find the service manual here...
files.totalhomesupply.com/data/LG/PTAC/LP123CD3Aservice.pdf

I have Leisure Refrigerator HJA6100 with the error code E8 flashing up. Any ideas what the problem could be?