Mobile fabar elife

no you don't need a manual its easy
Go to your normal home screen on the phone . Ie unlock the screen.
At the top of the screen you will see small white symbols .
put finger on them and pull/ drag finger down to see hidden menu
You will now see wi fi , location, sound, screen rotation, bluetooth
put finger on right hand side of these options and drag finger left
the forth option shown should be mobile hot spot
press on mobile hot spot with your finger
Attention
Enabling mobile hotspot will turn off wi fi
Cancel or OK
Click on OK ( you use wi fi to link the mobile data to the laptops , ect)
on your laptop you will see androidap as a wi fi network connect laptop to this !
network key come up
what is the password
go into the phones settings
look for Tethering and Mobile Hot spot
click on this
click on Mobile Hot spot
step 3 in list of instructions that have now come up will be the AndroidAP password you will need on the laptop , ect

Put password listed into laptop wi fi connection password question.

PS put mobile on usb power or usb charger while hotspotting !

You probably need to connect to your new wireless router.

Open the Alexa app.
In the Alexa app, open the left navigation panel and then select Settings.
Select your device and then select Update Wi-Fi. If you're adding a new device to your account, select Set up a new device instead.
On your Echo device, press and hold the Action button for five seconds. The light ring changes to orange, and your mobile device connects to your Echo device. A list of available Wi-Fi networks appear in the app.
Note: The Alexa app may ask you to manually connect your device to your Echo device through your Wi-Fi settings.
Select your Wi-Fi network and enter the network password (if required). If you don't see your Wi-Fi network, scroll down and select Add a Network (for hidden networks) or Rescan.
Optional - Save your Wi-Fi password to Amazon: Any Wi-Fi passwords saved during setup automatically appear when you connect a new Alexa device to the same Wi-Fi network. The password is also remembered if you switch between saved Wi-Fi networks. For more information, go to Saving Your Wi-Fi Passwords to Amazon FAQs.
Optional - Connect to a public network: Enter any required information if you are connecting to a public network that requires a web browser to sign in, like a school or hotel. The information could be a pre-shared password, room number, or just a button to accept conditions for using the network. This information cannot be saved to Amazon. Contact the network owner for more information.
Select Connect. After your device connects to your Wi-Fi network, a confirmation message appears in the app.

Hello Pavan kalya naidu,

Please go to mobile setting and turn on wi-fi on your mobile phone.
Now wi-fi network is on.
below your are showing wi-fi connection names.
now click on wi-fi connection and connect.
now asking for password.
enter correct password and click ok .

now your wi-fi connect on your mobile phone .

Thanks,

It's a good idea to access Wi-Fi whenever possible to avoid data charges. After you've activated the Android tablet's Wi-Fi radio, you can connect to an available wireless network. Obey these steps:

1. Open the Settings app.
2. Choose Wi-Fi.On some Samsung tablets, you find the Wi-Fi item on the Connections tab. Choose Wi-Fi to view a list of available Wi-Fi networks on the right side of the screen. Otherwise, the list shows up full screen.
   
3. Choose a wireless network from the list.When no wireless networks are listed, you're sort of out of luck regarding Wi-Fi access from your current location.
4. If prompted, type the network password.
   Touch the Show Password check box so that you can see what you're typing; some of those network passwords can be long.
5. Touch the Connect button.
   The network is connected immediately. If not, try the password again.

When the tablet is connected to a wireless network, you see the Wi-Fi Connected status icon. This icon indicates that the tablet's Wi-Fi is on, connected, and communicating with a Wi-Fi network.
Some wireless networks don't broadcast their names, which adds security but also makes connecting more difficult. In those cases, touch the Add icon. This icon might also be labeled Add Wi-Fi or Manually Connect. To make the connection, type the network name, or SSID, and choose the type of security.
You also need the password, if one is used. You can obtain this information from the girl with the pink hair who sold you coffee or from whoever is in charge of the wireless network at your location.

• Not every wireless network has a password. Still:
• Be careful when connecting to a non-password-protected network. It's possible that the Bad Guys can monitor such a network, stealing passwords and other information.
• Some public networks are open to anyone, but you have to use the web browser app to find a login web page that lets you access the network: Simply browse to any page on the Internet, and the login web page shows up.
• The Android tablet automatically remembers every Wi-Fi network it has ever been connected to and automatically reconnects upon finding the same network again.
• To disconnect from a Wi-Fi network, simply turn off Wi-Fi.
• Use Wi-Fi whenever you plan to remain in one location for a while. Unlike a mobile data network, a Wi-Fi network's broadcast signal has a limited range. If you wander too far away, your tablet loses the signal and is disconnected.

First of all your mobile should have Wi-Fi and support the encryption/security of your Wi-Fi access point.

If your Wi-Fi AP using WEP or WPA most of the Wi-Fi enabled handphones support it and the setup is quite straight forward.

I am giving generic guidelines as the model of your phone is not known.

Just do a wi-fi scan and create the new AP. When asked for the security select the appropriate (e.g. WEP or WAP) encryption and enter the key.

Close the app and start using it.

Wi-Fi Functionality

1. Connects over the last Wi-Fi network you used that's available.
2. If no Wi-Fi networks you've used are available, iPod touch will scan for Wi-Fi networks and show a list of Wi-Fi networks in range. Tap a network and, if necessary, enter the password to join. Networks that require a password show a lock icon () next to them.
3. Option to manually enter your Wi-Fi network name/SSID (if the Wi-Fi network is configured not to broadcast or be displayed to the public). If necessary, enter the password to join.

When iPod touch is connected to a Wi-Fi network, the Wi-Fi icon () in the status bar at the top of the screen shows connection strength. The more bars you see, the stronger the connection.
Wi-Fi Settings

1. Turn Wi-Fi on or off.
   Choose Settings > Wi-Fi and turn Wi-Fi on or off.
2. Set iPod touch to ask if you want to join a new Wi-Fi network.
   When you are trying to access the Internet, by using Safari or YouTube for example, and you are not in range of a Wi-Fi network you have previously used, this option tells iPod touch to look for another network. iPod touch will display a list of all available Wi-Fi networks that you can choose from. Networks that require a password appear with a lock icon ().
   
   If "Ask to Join Networks" is turned off, you must manually join a network to connect to the Internet when a previously used network is unavailable.
   
   Choose Wi-Fi and turn "Ask to Join Networks" on or off. If you turn "Ask to Join Networks" off, you must join new networks manually.
3. Join a Wi-Fi network manually.
   Choose Wi-Fi, wait a moment as iPod touch detects networks in range, then choose a network. If necessary, enter a password and tap Join. Networks that require a password appear with a lock icon.
4. Make iPod touch forget a network, so that the device doesn't join it automatically. Choose Wi-Fi and tap the arrow () next to a network you've joined before. Then tap "Forget this Network."
5. Connect to a closed Wi-Fi network (an available Wi-Fi network that isn't shown in the list of scanned networks).
   Choose Wi-Fi, then tap Other and enter the network name. If the network requires a password, choose Security, tap the type of security the network uses, and enter the password. You must already know the network name, password, and security type to connect to a closed network. Some Wi-Fi networks may require you to enter or adjust additional settings, such as a client ID or static IP address. Ask the network administrator which settings to use.
6. Adjust settings to connect to a Wi-Fi network
   Choose Wi-Fi, then tap the arrow () next to a network.

try to disable Wi Fi Protected Set up(WPS) in the router, use 64bit WEP security

First connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then you can see configuration page of router settings.
Go to wi fi or wireless menu then find WEP or WAP security code key it is your password to connect wi fi network.If it is in * or # format then add new code so you can connect it with new code.
then save settings and restart router.
Then add that code key in mobile for connect wi fi .
Let me know if you need more assistance.
Thanks.

WEP or WPA are the abbreviations of Wired Equivalent Privacy and Wi-Fi Protected Aaccess. These are similar to password to access to people wireless network. You should have one if you've got internet and wireless network in your house. You can paid T-mobil for Wi-Fi fee ($20.-/mo) and they will give you thru' your T-mobil phone, and you can use your PSP with new WEP or WPA at any WI-FI spots like Starbuck, Barn & Noble....

I hope it heps.