SOURCE: BROTHER MFC 210C INK ABSORBENT BOX
You can order the part directly from Brother ( ph # 1-800-284-4329). The part is called an "Ink Absorber Box Assy" . The part number is LF7544001 for a MFC-210C printer. It cost about $11 and shipping is about $5. There is a website that has different diagrams for various brother printers. You will also see part numbers.
SOURCE: How to check ink level on brother MFC-9440CN?
Hello,
Run the Brother Control Center. Click Device settings. Click where it says Inklevel.
A simpler way is Start-->All Programs-->Brother--> ...-->Status Monitor.
An icon will lodge itself on the tray (a printer). When icon is clicked on, the inklevels will show.
Hope it helps.
SOURCE: Brother MFC-465CN printer. Need a fix for error 46.
The problem is due to the fact that Brother machines excessively self-clean. Each time they self-clean a small amount of ink is dumped in to a holding tank/sponge. When a predefined number of self-clean operations have been performed, the machine refuses to print and gives the error message you have stated. Brother state that the tank/sponge must be replaced before the counter is reset, again by a Brother agent.
However, there is a way of reseting the self-clean counter yourself - if you Google your model number and the error code somewhere in the results you'll find how to do it. The only risk of doing this without changing the tank/sponge is that it will eventually overflow and leak out the bottom, but I did my Brother all in one some time ago and have had no problems yet.
SOURCE: how to reset brother j125 printer's ink absorber full
how to reset brother j125 printer's ink absorber full
177 views
Usually answered in minutes!
×