Help! I have a 5 year old sears kenmore washer model #110.23812100. I made that terrible mistake of thinking that it would not hurt to wash a sleeping bag. After that my washer will not agitate and makes a really loud clicking noise that causes the washing machine cord to become really hot and makes the lights in my basement ficker on and off in sequence with the washer clicks. There isn't any black dust or any signs of leaks (either water or oil) underneath. It fills, spins and drains normally. Any ideas? I would really appreciate it. Thank you.
Sounds like u may have broken the coupler gear between the motor and transmission... the replaced the belt with these gears on this model... But should go fill & pumb water out and NOT spin Or agitate... IF these gears or broke or stripped... heavy loads like u said would do this... recheck and see if wash will pumb water out But will NOT agitate or spin.. IF so the above is your problem and is Not to hard to repair or much money
Below is a pic with the motor remove the white piece in the middle is 1/2 of the gear system with a rubber piece in the middle (not there) and another like gear on the motor
sounds like these gears may be broken or stripped on your washer
How do you take apart washer and repair problem send pics
3,259 views
Usually answered in minutes!
i have almost the same problem except when i looked underneath it the belt was just sitting there. where does it go. a picture would be extremely helpful.
×