Zenith sh-5105 lights won't come on

I'm not sure what a laser star is

EASY ACURA HONDA ABS VSA BRAKE FCW SH AWD TRACTION CHECK ENGINE LIGHTS FIX

Need manufacturer or brand name

Don't know what "sh lights " are but it's time to start checking fuses and conectors for the lights and I've had radio's just take a dump out of the blue! Shot!

There are settings on the sensor itself. Should be a dusk to dawn setting that will keep it off during those times and then function at night. as far as not working I would first suggest setting the sensitivity. Disrupting to power could have reset this.

Hmmmm. Could be the detachable panel itself. Call customer relations.

look to see how you have it wired, most sensor lights have many wires to put together, if it is not wired already from factory, you need to look to see how you have it wired, most sensors have three wires one black one red and one white, black wire goes to power, red wire goes to lamp, white goes to neutral, after all is wired you should have only 3 wires a black a white and a green, black to power white to home neutral and green to ground

Switch the Dual Timer selector to OFF.
Wait 1.5 minutes for fixture to recalibrate.
Then check fixture again.

http://heath-zenith.hcents.com/data/manuals/598-1152-05.pdf

Insure you are using a standard flood light on motion sensor lights and not a florescent energy efficient flood light as they take longer to reach full brightness as the bulb filiment warms up. They are better suited for constant lighting rather than intermittent purposes such as sensor lights.

Good Luck

I am in the middle of a discussion with Heath/Zenith over a closely related and perhaps identical issue. I purchased their 5718 model from Home Depot and based on the fact that their brochure stated that "CFL bulbs are only usable on 270 degree units." I purchased the model 5718 unit (270 degree) and used CFL bulbs. It experienced the same problem others noted.

The technician at Heath/Zenith told me that only DIMMABLE CFL bulbs would work with this unit (even if the DualBrite feature is turned off). Standard CFL bulbs will not work.

Their brochure does not make that clear. Perhaps that is the answer to others' problems.