Mitsubishi wd-62825 tv dlp what causes a green light on front of tv blinking fast on and off and tv will not turn on
The WD62825 has a Digital Module located on the left side of the chassis looking at it from the rear of the set. It's housed in a metal box that can slide out of its holder after removing the trim screws.
The module has its own power supply board and there are a group of 16v/1000uf caps on that board which commonly fail causing the constant flashing standby light. Further back on the module is a small board about the size of a matchbook called the E2P module. Its SMT (Surface Mount Technology) caps also commonly fail which can cause the same symptoms. Techs can tell whether the E2P has failed by simply removing it, hooking the DM back up and trying to power the set. If it powers on the picture won't be much good - but at least you can tell what's keeping it down...
Back to the caps on the pwr board. If they've failed they usually will buldge visibly on top. And ESR is almost not necessary. In any event that's the nuts and bolts on this model.
Is it a job for a layman? Yes and no - you might strongly consider a tech if you don't feel comfortable removing all the connections that the DM has with the signal board. There are about six - multi-pin - wired connections to unplug and then sliding the DM out of the unit and carefully removing the screws and latching to take the DM top cover off...
Hope this helps.
Bill
The TV will not come on and the light just keeps blicking. What is the problem?
We have dlp tv model wd-52825
this tv is blinking green light constantly wont power turn on key switch dosent work
replaced capacitors in power/signal/dm/ fmt/terminal board but still green light blinking
i checked power pcb
a.stand by power ok(tp30v,tp12vs,tp6vs,tp+15v,tp-15v)
b.main power dosent work(pon-2 power on voltage not come in from micom)
do you have other solution please contact us
thank you
myong west
2,213 views
Usually answered in minutes!
I had the chasis replaced twice. After the chasis has been replaced the tv works for about two days and then the green light starts blinking again. I get a green screen with black vertical lines then the TV shuts off. I can get it to turn back on by the reset button or unplugging the unit. This works for up to 1 hour then it shuts off again. The fan always runs. I heard this tv has a problem with the DM capisitors. please let me know what my options are. The service person is not reliable
mitsubishi wd-62825 will not turn on green light blink.could not reset. tried unpluging,
I have the dame problem: continous flashing green light. We have been
without a TV since Dec. 31, 2007. The repairman said it needed a new
chassis. Now he says the chassis are no longer available. He is
currently waiting on a new board which was supposed to be in on Feb.
18, 2008 and has now been pushed up to March 15, 2008. We paid $5500 for this TV in Dec. 2004 and have insurance but don't want to have to wait forever for it to be fixed ...IF IT CAN BE FIXED!!!
I have a similar problem with 62 inches dlp but my blinking green lights do not stay on. it only blinks for about 70 seconds and then nothing no power up
Our green timer light keeps flashing and we can't reset it. We've unplugged it, hit the reset button, removed the cables that connect it to the cable box and then re-attached them and the light won't reset. This happens all time and it takes days to come back on. Help!
Mitsubishi Wd 92480 TV won't turn on
When turn on Mitsubishi WD - 65732 DLP TV green pwower light comes on, then after a few minutes the status light turns red. Unplugging and replugging the tv did not help.
model 62825 green timer light blinking
tv keeps blinking snd shuting off
I turn my tv on and after like 15 minites it starts to flash and turns off
Wd-73738 mitsubishi dlp the green light come on but after 2 mins there a red light flash 6 times and amber light flash 1 time
the screen is black the power light flashes green fast but after a while turns red
no power
×