I cant figure out how to get the lenses to work?

Unless you have a lens collimator and other equipment needed to ensure proper alignment when reassembling the lens, take it to a good camera shop and have a properly trained and equipped professional clean it.

if its a caravan remove three bolts holding lense assembly in then replace bulb,re install lense

i recomend u buy new head lamps from keystone great prices crystal clear lenses again. but the make a polish that doesent really work 1 out of 10 it gets a 5

hi there, i am sorry but there is no reset button that can fix this problem. the gears on the lense have been dis lodged and needs to be reposition. the camara would have to be picked down completly for the lense to be removed and this is nothing you can do unless you know what you are doing. once re-posistioned the error code will go away and your camara will work as normal.you will need a technition and i cant do it for you because i am all the way i the caribbean (barbados to be exact) good luck and let me know if you get it repaired please.

I had an issue with "dust blobs" on my HD70 and was unable to locate instructions or a tutorial on how to remove them. I figured maybe this could help you if the hair is located within the same location as the dust. Please check out my blog at http://tantht.blogspot.com/ for instructions on how to remove dust blobs from a HD70 as this process worked perfect for me and I no longer have these annoying spots when watching movies!!

Hi Jeanice21, I just posted the same problem a few minutes ago with my SD400. I followed a few steps of the suggested solutions and here's what worked for me.

1) take apart the front and back by unscrewing the six screws holding the camera together
2) on the left of the flash, there are two little retangular holes with grooved dials in them
3) using a little flat head screwdriver, push up or down to turn the grooves while power up in the movie or capture mode
4) the lens retracted at this point and my camera started working again. Good luck!

help me solve this problem. - my camera stays "charging flash" and cannot take pictures

its really easy. Open the hood, you will see two metal flat bars on the backside of each headlight, holding the headlight assembly on. Pull up on each of them.... remove headlight. Ta da.

I took it to a camera shop. It cannot be fixed.

Your guy probably figured that out too. He kept the line open for 2 hours before I finally closed the screen. I really don't think his 5 minutes should cost me 14.95.

I had the same problem - try to wiggle the zoom lense really carefully and the switch it on again. The zoom objective is canted a little bit and the motor is too weak to move the zoom objective. You can also open the camera by removing all 8 screws around the camera and then removing the metal front (Just pull it in the direction of the zoom lens with your fingernails). Then you can access the zoom lens better ... Andy