Wiring diagram mitsubishi space wagon 2.4 gdi 1999

Try www.rockauto.com

The engine control module is most likely in the limp in mode. This can be caused by a defective engine sensor or the module itself. I would have a diagnostic test done to pinpoint the cause.

no turbo means no boost which means no boost pressure sensor

The wiring diagrams are broken down into systems, for instance the AC system and the ABS system and so on. I might be able to find a systems diagram, but the whole car no, that would require you to buy a factory electrical manual.

use the same oil you service with

you can refer here, hope you find useful answers https://sites.google.com/site/qwop2us

you have a problem here ,ask a local mechanic to have a look

Hello!

I wonder if you solved the problem with the Space Wagon as I have a 2000 Carisma with exactly same problem. Any hint?

Best regards,

JOSE

1. check for fuel filter block
2. check for spark plugs or spark plugs wire
3. some time the scond fuel pump got damige in this engine
4. check for coil or coil boot bad