Rw240 plotbase 3.7.8 - Ricoh - RW-240 Print Controller - 411737

This plotbase is old enough. Try to reinstall everything. Maybe there is a problem with your PC OS. Try to install plotbase on other PC.

how to connect Ricoh copier with computer network

Hi, Gd Morning would you like to tell me where you find PLOTBASE. i need this app if you dnt mind would you like to send me this PLOTBASE app on my email address ([email protected])

Go to this web site http://www.ricoh-support.com/ and see if there is what you want.
The equivalent model is Aficio 240W.
Go to the quick search and in the left tab scroll to the wide format an in the right tab select the model (240W).
See you!

Access the manufacturer's web-site (www.dlink.com ? www.linksys.com ? )
and locate, download, and install the device-drivers for the device.

Unscrew both the right hand side panels of the printer and you will see the bottle

scantools is installed with plotbase.
are u able to print?
if not , u need to install the full software .
(hope u have the serial no.-- on the interface card in the pc)

This requirement and solution are in the Plotbase manual, not the copier manual. See pp. 29-30 Setting for RW-240 ScanTool.
1. Start - Control Panel - Administrative Tools
2. Local Security Policy
3. Local Admin Policies
4. User Right Assignments
5. Lock Pages in Memory - Local Security Setting
4. Add User or Group, then Advanced
5. Add or Find Now - select users (all)
6. OK
7. close Local Security Setting windows

can't quite make out the detail on buttons on the image I have of your calculator but here goes.

say for example, the geometric mean of 2 × 3 × 6 × 8 is the 4th root of 288, or approximately 4.12.

enter nth root first, in this case 4 then shift then root symbol then open bracket, 2x3x6x8, close bracket then = ,
should give you 4.1195 etc