7101 error code - Kyocera Color Copier, Km-c2525e

7100

The toner supply motors (all og the motors actually) have a bad problem with blowing the pico fuses. Check the fuses on the motor control boards (on the motors themselves)

I did the drill think once. but today when trying to repair an old Lakewood 7101, I removed the two screws holding the front cover in place (top and bottom). the cover slides down and out. and underneath I see a large plug that can be unscrewed to drain or fill the heater!

Contact Thuraya by e-mail - ship the IMEI number and ownership data and see from there.

Most of the distorted display related to video memory. MS-7101 Motherboard coming with embedded video controller so your system memory is sharing space for the video memory. Replace and check your system RAM or check RAM module with Memtest , if it is showing error u should replace memory module.

I just drill a hole and I put old oil in my used motor oil

where I can buy a Tharmaster for Heater #7101 P175 10/250 1250 Thank you

Your heater is sealed and never needs any more oil than already is there. In the unlikely event when the oil leaks out - replace the whole heater.