- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sometimes it can be due to the program controller unit hanging. please the mains power, check for filter capacitors might have gone weak, check the wiring to the controller unit.
this means that the door is not shut check to make sure the door button is still there its behind the door on the frame you should see a little black button sticking out if its not there you need a new door switch if its there try pushing the door button a couple times really fast sometimes this button gets stuck if that doesnt work its probably your door lock
The blinking green lite that wont go off wont allow the tv to come on. We tried resetting the tv it doesn't work Also the tv has been off for days have to unplug from wall for couple days then replug and reset. It still doesn't work. Please help.
CHECK THE FUSE ON THE INVERTER BOARD, IFHIS DOESNT IT SOLVE IT REPLACED THE CAPACITORS, IF STILL SAME PROBLEM, THEN YOUR BACKLIGHTS ARE SHOT, HAVE THEM REPLACED
The solution at this point would be to get the power supply repair since new boards are not longer being manufactured. In about 95% of the time if the LCD doesn't power up or turns OFF by itself or need to be unplug for some time to make work again; those are the symptoms of a dying or defective power supply. I service these power supplies, for more info write to [email protected]
This machine has a lot of problems. One thing that often works is to turn it off and unplug it for a couple of minutes. Then plug it in again. Then it will say "loading" for quite a while. Leave it alone until it turns itself on. Then it should be okay. If the couple of minutes doesn't work, sometimes unplugged overnight (same method) works, but then you have to reset everything.
No you didnt ruin your washer, in fact that is the only way to reset the electronics. Just like the computer you are on, they sometimes glitch and lock up. Unplugging a washer doesnt harm it. It doesnt have a hard drive. If the washer continues to do this you will need to replace either the main computer or the display board.
couple things this could be lets start obvious
faulty door switch even though door latches doesnt mean its working properly
bad guages easy to check dont have to run dryer just guages
turn on setting let run threw cycle if it stops on cycle and dont move for a length of time this will be the problem
these 2 things are main causes of why a machine wont work or partcially works at times everything else is easy
Unpluggin the machine is pretty much the only way to reset it.Leave it unplugged for a couple hours if that doesnt work its most like a control board issue
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
wont drain sometimes either. not plugged and drain hose is not backing up
Add a Comment.00++
Add a Comment.
button stuck sorry
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
Add a Comment.
×