I have a Kenmore top loading Washer (70 Series). Once the machine gets to the spin cycle the motor will kick on, the water will drain, but the machine won't spin. If you let it run it will continue with the cycle, and will enter the rinse cycle as normal, at the end of the wash cycle the clothes will be in a soaking heap at the bottom of the washer. If at any time during the spin cycle you open the lid, the motor will stop, you will hear a click, and once the lid is closed again the machine will spin as normal. What needs to be replaced
It appears your timer/main controller/CCU has failed in this instance.
For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...
FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.
PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.
If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.
Anything too complicated or beyond your scope should be handled by a professional.
If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
608 views
Usually answered in minutes!
×