Error code 0040 - Symbol PDT 3100

0040 - suction fun motor malfunction problem.Use the vacuum cleaner and clean the ventilators.

OR

Replace the fan at the top of the machine. the one that is at the top, near the optical section.

You'll need a Palm with OmniRemote software
1. Type in (or transfer) the memo below to your PDA
   Import it into OmniRemote with this menu command:
   Advanced-->Databases-->Import category
2. Point your PDA towards your player put OmniRemote in TV-mode and press 0 (Zero)

Memo (Name: Category-TV): Category-TV Button name-Enter 0000 0067 0000 0000 Button name-0 0000 0067 0000 0044 0155 00ac 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0404 0155 00ac 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0404 Button name-7 0000 0067 0000 0000 Button name-8 0000 0067 0000 0000 Button name-9 0000 0067 0000 0000 Button name-4 0000 0067 0000 0000 Button name-5 0000 0067 0000 0000 Button name-6 0000 0067 0000 0000 Button name-1 0000 0067 0000 0000 Button name-2 0000 0067 0000 0000 Button name-3 0000 0067 0000 0000 Button name-Channel up 0000 0067 0000 0000 Button name-Channel dn 0000 0067 0000 0000 Button name-Last 0000 0067 0000 0000 Button name-Volume up 0000 0067 0000 0000 Button name-Volume dn 0000 0067 0000 0000 Button name-Mute 0000 0067 0000 0000 Button name-Power 0000 0067 0000 0000 Button name-Favorite 0000 0067 0000 0000

no such codes, it would be something like a po 441 or po 045. recheck your codes,good luck.

check and clean the Primary Charge unit or check all the door actuator check if there is damage .it couldbe the laser gate is not opening because the (door)actuator is broken

Clean the thermistors and the thermofuses the first copier,to second copier vacuum cleaning the suction fan ventilator and ozone filters.

This happens when you let the "maintenance req. 0040" go for to long. The machine turns itself of to prevent damage.

Solution: Call epson and they will give you the reset code. Cannot find these codes online so if you do call please post instructions

This is the only Blu-ray player that can be made region-free.You will need a professional and fully programmable service remote, like Harmony or a Palm or PDA that can support Omniremote software. The procedure may look complicate if you have not done anything similar before. You will have to reprogram the remote using a PDA or a computer.

Print this out and follow instructions here.

For example using OmniRemote™ Pro V2.01 and a Palm
1. Install the OmniRemote on the Palm, or PDA.
2. Copy the current Category to the Palm memo pad
3. Modify the "Button name-0" data with the following code:
0000 0067 0000 0044 0155 00ac 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0404 0155 00ac 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0404
4. Import the database in omniremote
5. Turn on the DVD Player. Press newly programmed 0 button on the palm. The Palm will control the DVD, and the DVD Player will turn off and on again. On restart it will be region free.

aha and your printer is not functioning right now isnt it, or it is still operational, either way that error must be solve or you will never use your printer. this error means that your pump motor is near end about 5% of its life is left. here is the sure solution for your prob. turn off your printer then press the left, down arrow and enter simultaneously then power on the printer. inside initialize the sponge and cleaner then turn off and on your printer. note: you will have to replace your pump cap assy. if it is already poor in cleaning otherwise your printhead will suffer.