M1962d reset how to factory reset

hi Linda.
How to factory reset the Galaxy S7

1. Swipe down from the top of the screen to pull down the Notification Shade.
2. Tap the Settings button. It looks like a gear.
3. Swipe up to scroll down on the settings screen.
4. Tap Backup and reset.
5. Tap Factory data reset. ...
6. Tap RESET DEVICE.
7. Tap ERASE EVERYTHING.

How to factory reset the Galaxy S7 ' Android Central

https://www.androidcentral.com/how-factory-reset-galaxy-s7
to read up more you could go to this link.
how to Factory resetting my Samsung Galaxy S7 Google Search

There are two types of resets that you can perform on nabi - forced reboot and factory reset. In the unlikely event that your nabi becomes unresponsive, you can easily perform a forced reboot. A factory reset is recommended when slow performance persists or if you want to wipe out all of your personal data and settings from nabi. Forced Reboot: To perform a forced reboot, hold the Power Button down until nabi turns off. When nabi is off, press the Power Button to turn on nabi again. Factory Reset: Caution! A factory reset is a very serious process because it will SYSTEMATICALLY WIPE ALL USER DATA from nabi. A factory reset will return nabi to its original factory settings.To perform a factory reset from Mommy/Daddy Mode, tap All Apps > Settings > Backup & reset > Factory data reset > Reset tablet > Erase everything. Please note: We highly recommend backing up your nabi prior to performing a factory reset. You can back up your music, videos, photos and apps with nabi™ Sync.

Does your remote control unit has an exit button
if yes try using this then add a channel and then close your tv set
After this you should be fine

hola, la pantalla de mi tv se ha quedado en blanco y un codigo que pone v3.16.0 recorre la parte superior de la pantalla. que devo hacer?

If you are using it as a computer monitor, it does not have a driver, it relies upon your video card to have the compatible format. This is consistent when using an HD TV as a computer monitor.

So Identify your video card, download the driver, even if it is an older operating system, the driver will still work if you are on the same basic architecture- 32 bit versus 64.

I have the same problem...did you find a solution?? Please let me know!

The USB port on this monitor is just the USB hub than expands your PC USB port to the monitor (USB port of the PC will have to be connected to the USB in of the monitor). It is not a stand alone USB port.

1. Power off your monitor with POWER button

- Hold MENU button and keep it pressed while pressing POWER button

2. Press MENU button to enter Service menu

3. Change panel type

- Press SET button until PANEL text is yellow and press (-) two times to change it to LPL22W 4L

- Press MENU button to close the Service menu

- Press POWER button to power off your monitor and remove power cable for a minute and plug it in again

Hi, you should be able to receive it. There should be a button, either labelled TV or DTV, that will flick between normal ariel viewing mode or DTV.
Have you tuned everything in?
You should be able to get all channels.My Father in-law uses a seperate box with an indoor arial and gets everything crystal clear.

I fyou need more help - then please ask.

Tony