Philiphs 50pfp5332d no enciende

Error 46

Description Pacific 3


Detected by VIPER

Device T6TF4HFG


Error/ Prot E

These info are for qualified service technicians.

look on the fuse for amps and volatge it sould tell you may be a peco fuse i dont know of a fixed fuse

Please post in the site language which is English. Thanks

Philips lists 3 models of your TV:
1) 50PFP5332D/37
2) 50PFP5332D/37B
3) 50PFP5332D/37E

User Manual for your TV (actually for the 50PFP5332D/37E):
http://download.p4c.philips.com/files/5/50pfp5332d_37e/50pfp5332d_37e_dfu_aen.pdf
The user manual doesn't document the logic board blink codes for errors.

What this tells me is that the TV went thru two revisions before reaching version E.
in case it helps: Philips Customer Support: 1-888-PHILIPS.
If they can't help otherwise, they can at least tell you if your set is eligible for warranty service.

You either need this part (http://cgi.ebay.com/Philips-50PFP5332D-37-LJ92-01401-Buffer-Board-/150501144120?pt=LH_DefaultDomain_0&hash=item230a913638) or this one depending on your dead screen issue (http://cgi.ebay.com/Philips-50PFP5332D-37-LJ41-04216A-X-SUS-XSUS-Board-/170550290208?pt=LH_DefaultDomain_0&hash=item27b596e720)

I have the same problem with my TV. I haven't verified this yet, but someone I know who's a electronics genius told me that its the buttons on the TV (power, channel, volume, etc.) He said at the factory many of the "button boards" were tightened too much and cracked. When you turn the TV on, the clicking noise is a loose connection. He said it's easy to replace yourself, and about 30 bucks on ebay. No promises though.

There are no service manuals. All necessary voltages for trouble shooting are on the modules.

the Philips 50'' Plasma TV model 50pfp5332D/37
has only one main board
has many sub bords supporting tat main board

i have philiphs tv sometimes going to standby

Here you go.
The remote may not turn the DVD player on and off. Try the codes one by one, with the unit playing a disk. Then try the FF/Rew to see if it is the correct code. Worked for me after all else failed......frustrating huh?