Stuck on loading, won't go pass loading even after resetting

Hi Kaydi, The link below is a youtube video showing you how to fix your tablet, There's video's down the right side you can check out as well....CHEERS..
https://www.youtube.com/watch?v=0PAB6khykWE
How To fix any Android Phone Tablet that won turn on

reset it somewhere to push a few buttons together by reboot or start this will maybe the tablet goes booting in a bios factory mode with Chinese symbols like a Polaroid smartphone.

Won't boot past tv face - Fixya

www.fixya.com/support/t26041897-boot_past_tv_face

34 mins ago - Won't boot past tv face - Kurio 7S Tablet question. ... How do I show a video from face book it just boots me off. Dec 20, 2014 ' Apple iPad 2.

My kurio 7 tablet is stuck in the kurio loading page. What can ...

www.askmefast.com > Computers & Internet > Google > Tablet

Kurio 7 tablet how to fix when the smiley face screen stays on the screen .... Kurio 4s wont pass start up ... Kurio 7 won t go pass the smiley box ..... My kurio 7 has been dead for awhile and is stuck on the screen with the little tv what do i do?

[PDF]INSTRUCTION MANUAL - Kurio

www.kurioworld.com/k/us/parents/pdf/Kurio7_Manual_US.pdf

The Ultimate Android™ Tablet for Families™ .... Connect Kurio to TV screen. .....Note: The reactivity of the touch screen can vary from one person to another, which is linked to the nature ... To exit the Android interface and go back to Kurio interface, press . .... When the icon is like this , the user won't be able to delete or add.

Getting started - Kurio 7 - Kurio Tablets

www.kurioworld.com/k/us/parents/support/7/gettingstarted

It could have hardware problems. It could have software problems. To troubleshoot software problems, when on the initial start up screen carefully introduce a paperclip end into the *Reset* button hole until you feel a little click. Your device should then turn off automatically. Some start up again automatically, some don't. Give it a minute or so and it it doesn't start back up by itself. Push and hold the power button as usual.

This should clear up any software problems and this doesn't cause you to lose any data or changes you've made.

Hardware problems such as a memory chip gone bad will not be helped by a Reset Button reset nor will they be helped by a *Factory Reset" which is done by holding down a combination of Volume(-) and Power buttons to get into the Android factory reset options text list. These are drastic and will cause you to lose any and all personal data and changes you've made to the device. A factory reset will put the device back to new condition. But, alas, even a factory reset will not help if you have hardware problems.

Sounds frozen to me ! try reset and if that does not work , remove battery for 5 minutes always helps because you are resetting to factory default. Unless you reset to default it will stay stuck on the dancing face.

Google make model manual
download it and check for Factory Reset

You will need to do a factory reset:
- Power off machine.
- Hold down + first and then POWER for about 10 seconds, release both buttons once Kurio screen loads .
- When you get the open Android picture, press + to enter menu, use - to move down to "wipe data / factory reset" and press POWER again to choose.
- Next press - to choose "YES" and press POWER to start reset.
- Check for yellow text Formatting /data, formatting cache, Data wipe complete.
- Choose reboot system now and press POWER to complete process.

There are two things you can try for this. The first is to reboot the tablet using the power switch. The other is to press in the Reset button on the backside of the Meep. If neither of these helps the situation, you'll want to contact the OSI call center.

This is everything you need to know to root/unlock/factory reset your Proscan 8" Tablet a.k.a. PLT8031.

First thing you will need to do is charge up your device, download the software needed to your desktop or some other easily accessable folder. Now this is the part that took nearly 3 days to figure out in order for the program to recognize and load an image to it you have to put the device in "recovery mode". You might ask well how do I do this, as every forum out there just says put in recovery mode and it will work, BUT HOW you still ask. The internet won\'t tell you, the company won\'t tell you, hell even other people on forums won\'t tell you. But alas I shall.

RECOVERY MODE Proscan PLT8031

Simply plug in your usb cable to your computer, then while holding your menu button, to clairify as I don\'t know the exact name of the button, it\'s the one to the left of the home button. plug in the usb cord to the device while still holding that button. Do not let go of the button until you see that windows has detected your hardware and is looking for a driver.

FYI windows usually will not find a driver, I have included links to the drivers you will need.Now if your at all used to device manager you should know how to point it to the driver you need. It will be called "rockusb.inf".

Once this is installed then open and run "RKBatchToolv1.4" as administrator. You then need to click the three dots in the top right to locate and load the "update.img" file. Make sure at this point that your device is recognized with a "green square" near the bottom of the window.

If all that checks out click the upgrade/restore button. To be clear it\'s one or the other, not both, technically didn\'t see a difference between them. This process will then start and will take between 5 to 10 minutes. DO NOT TOUCH ANYTHING. if you unplug your device too soon you will have a nice paper weight instead of a tablet. Wait untill it is completely booted into the setup your android device screen before closing the rkbatchtool and safely disconnecting the device.

Congrats on your newly rooted/recovered plt8031 tablet.

29RockUSB Driver - http://uploading.com/2ca29934/29Rockusb-zip

http://www.generalfiles.com/download/gs5a611f4bhci0/29Rockusb.zip.html

http://rapidlibrary.com/files/29rockusb-zip_ulcqxffyzwieon.html

If none of these work for you just google "29RockUSB" without quotes.

Firmware (update.img) - http://www.proscanvideo.com/tech-help/PLT8031.asp

RKBatchToolv1.4 - http://www.filecrop.com/RKBatchTool-1.4.rar.html

http://www.x-drivers.com/catalog/flash/tablets/companies/fuzhou_rockchips_electronics/models/rk_batch_tool/27575.html

Hi, I can do the "hard reset" but then my screen gets stuck on the icecream sandwich with the watermarks.

How do I get past this???