Dryer doesn't dry

According to the online manual for a different model Siemens dryer:

"Press and hold the "Ready in" time button and the drying time button at the same time for 3 seconds to activate or deactivate the childproof lock."

Is your water jacket empty? Could be something simple like that.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

What is your question about it

Yes, it is true. A Siemens dealer will have one and the price will depend on where you buy it from.

Hi what does an F16 Error mean?

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

Hi from retired Englishman in SW France,

Methinks you could do with a manual now and for the future as I'm sure it would act as translation!
You will need to type into your search engine/web browser '(make) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!
You could also try the manufacturer's web site direct.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Hi

The sound for program status can be set by pressing and holding the button with a T-Shirt marked on it. Hold the button until a sound emits from it. Wait until the sound level changes to the level you want it at - release the button and the setting will be saved.

Hope this helps. Please remember to rate my answer. Thanks.

take top off. you will see dry manifold running across the top with various stats mounted on it. one of these stats will be resetteble ie with a small knob in middle. press and stat will reset. also check continuity thro the dryer heater and the other stats.
if a resettable stat has popped out, check also for lint blockage in the dryer duct

dry heater is located under an aluminium housing on top of the machine. take it to bits and easy to fit. however, why do you need a heater? if no heat on dry, cause is probably overheat stat operated