Sony code remote control

$14 for a replacement remote

https://www.ebay.com/itm/323207861958

and here, even Walmart

https://www.google.com/search?q=sony+str-ks370+av+remote

I have never heard it called an 'IR Profile', but this is the programmable remote code.
AV Receiver - 52172

Codes to check with Sony brand TVs are: 1245 1235 1483
1238 1482 1474 1216 1352 1065. If you wish to get more, check these links. http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

The top 7 codes we have for Sony are 629, 671, 898, 888, 919, 778, 500. The link will have more codes to try should those not work.

Remote Codes: http://www.mydish.com/support/apps/remotecodes.aspx

Tommy Faust
DISH Social Media Representative

Remote code for a Sony BlueRay/DVD player Welcome to Remote Central Universal Remote Control Reviews More

Hello, Cheri Torres with DISH Network Customer Service here. I came across your post and would like to help! I will list here for you the best codes for 20.0 IR remotes for Sony DVD Home Theater Systems as well as the instructions for addressing your remote to the system. I hope you find this information useful and if you have any further questions or concerns feel free to email directly at [email protected].

Codes for 20.0 remote
2846, 2784, 2765, 2766 and 2500

Instructions for addressing your remote to your Home Theater System

1. Press and hold the desired mode button until all mode button back lights come on, then release.
2. Use the number buttons to enter the device code corresponding to the equipment.
3. Press the POUND (#) button.
   
   If the code entered is valid for the remote, the mode light flashes three times.
4. Test the functionality.
   

Hi, Cheri Torres with DISH Network Customer Service here. We have a few different codes for each of our different models of remotes. The model number will be located on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for Sony TVs as well as the instructions for addressing the remote to the TV. I hope you find this information useful and if you have any further questions or concerns feel free to email me directly at [email protected].

Codes for Sony TVs
3.0, 3.1, 3.2, 3.4 IR remotes - 500, 000, 590, 640, 766 and 837
5.0, 5.2, 5.3, 5.4 IR remotes - 500, 640, 514, 810, 758 and 578
4.0 and 4.4 IR/UHF remotes - 500, 000, 590, 683 and 837
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - 500, 640, 683, 758, 590 and 837
20.0 IR and 21.0 IR/UHF remotes - 781, 500, 611, 837 and 590

Instructions for address the remote to the TV

1. Turn the Television On.
2. Press and hold the TV mode button until all other mode buttons light up red.
   
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button once. Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

www.remotecodelist.com

www.tvcodes.com

www.remote-codes.com

ww.hifi-remote.com/ofa/codes.shtml

The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

If you are looking to have the Dish remote operate your TV, just do a random search for your tv. First, hold down the tv button on the dish remote until all the rest of the light up. Next press the tvpower button on the dish remote. Next, press the channel up button (this is the up arrow button) until the set turns off. When it does turn off, press the # key at the bottom right of the remote. The tv button will light and flash twice. That's it. Your done. Hope this helps.