E6 displayed treadmill not working - Dmm Vision Fitness T9500 Treadmill

How do I fix error 6 on my treadmill?

E6 Error: Controller malfunction. Resolution: Ensure that the cables connecting the console and the controller are secure. If any of the cables/connectors appear loose, completely power off and unplug the treadmill before unplugging and reattaching the cables.Sep 23, 2021

E6 Error Code: Control Board Malfunction - Spirit Fitness Support

https://www.google.com/search?q=LIFE+FITNESS+T3+ERROR

..

Question edited for clarity.
Question moved to 'Everlast Fitness' category.

E6: Insufficient power To clear: Check if voltage is too low or if the controller has been damaged. Replace the controller if necessary.

https://www.dyaco.ca/manuals/Treadmills/Everlast/16005606510-EN.pdf

https://www.google.com/search?q=everlast+treadmill+e6+error

..

If you wish to get some details about treadmill repair then check the following link.
http://electro-medical.blogspot.com/

It appears that your elevation system is where the fault lies. This could be as simple as recalibrating the lift mechanism, or possibly correcting faulty wiring from the lower controller to the lift motor. Be sure to check the condition of the lift motor as well as the wires entering the lift motor. Sometimes the wires will pull away from the plastic connector causing a lift motor error

Its showing e6

nice .

please proceed according and fix it. God bless you
trouble +cause+ solution

E6 Faulty Safety key Check Safety key or switch
Elv. Motor not moving Check Elv. Motor
connections
Elv. Motor screw binding Clean screw, lubricate or
remove obstruction
Elv. Motor out of range Check motor zero position
Elv. Potentiometer Calibrate elevat ion motor

E6 is error code. You need to go to Vision Fitness website to request the answer to your question. It probably has something to do with the timer circuit.

If you wish to get some details about treadmill error codes ; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

hello,kindly download the below file... it explains ur error and how to rectify it
http://www.body-solid.co.uk/body-solidUK_download/pdf_docs/tr-20(1)E6+E7(XT-27_33_56_57_7600).PDF
thank you for using FixYa,Thanks,Reymond