When i flip my blackberry torch up it goes blank or flashes

The is needs to be flashed. Take it to a repair shop

You can get the Blackberry Torch 9800 Model Network Unlock code from Mobile-unlocker.com/blackberry-9800-torch/rs2wp9/ and Unlock it easily.To enter the code follow the instructions below and unlock it step by step....

Blackberry Unlocking Instructions for Torch 9800:


Warning : Do not enter any wrong unlock codes on your Blackberry 9800 Torch mobile phones. If you enter over a certain amount of wrong unlock codes on your Blackberry 9800 Torch mobile phone, your phone may get hard locked and sometimes become unusable.

1 - Switch ON your Blackberry 9800 Torch with your current network/service provider's SIM card.
2 - Using the menu go to Settings Menu -> SIM card and press select.
3 - While holding the SHIFT key, type mepd.(NOTE: You may not see any text appear on the screen while typing mepd)
4 - You should now see the five locking categories listed.
5 - While holding the SHIFT KEY, type mep2.(NOTE: You may not see any text appear on the screen while typing mep2).
6 - Release the shift key.
7 - You will now be prompted to enter the Network MEP code. (it will also state how many attempts left)
8 - Enter the Unlock Code.
9 - Enter Return/Enter.
10 - The Blackberry 9800 Torch should then be unlocked.

The Blackberry Torch is Blackberrys first slide out phone. Though it retains many of the original features from the classic blackberry, it also has enhanced features such as touch screen. In fact, you are capable of using the phones touch screen without sliding out the qwerty pad. This website has indexed all Blackberry Torch manuals so you can download or access them quickly and easily

Here is your unlock code (on your blackberry we call it the MEP2 code):

6679989364731545

Here are instructions on entering the code.

Blackberry 9800 Torch Unlocking Instructions
Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Go to options, device settings, advanced system settings, simcard
2) Type in mepd using the keyboard (nothing will show on screen)
3) Type in mep2 another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key
OR:
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mepd, and then after the screen changed press mep2 (Please note that you will NOT see what you type on the screen) *
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

Good luck!!
EJ

My dear,

you have zero attempts left to unlock your blackberry. It is no problem. You can get it reboot or reset and then it would again have 10 attempts. After doing that, you can get your blackberry unlocked from Blackberry Unlocking Codes with IMEI. This vendor is highly reliable and uses only 1 attempt in total and provides excellent customer service. I am pasting the link for your model that would redirect you to Torch collection by CLICKING HERE.

hello,it is a flex problem that mainly occurs to flip phones as a result of various opening and closing of the flip.all you need to get is a new flex to fix up the faulty one.you can kindly take it to an authorized expert to fix it up for you if you are not electronically inclined.and also it could be a affect the inner screen soonest if not attended to immediately.it could also be that the outer screen is bad so after the flex is replaced if the screen still does the same then you will need to fix up the screen.
please kindly rate this solution if it's helpful,

take care.

A hard reset involves physically removing the battery from the smartphone and then reinserting it. To perform a hard reset, complete the following steps:
1) Remove the battery cover from the back of the BlackBerry smartphone.
2) Remove the battery, and then reinsert it after a few seconds.
3) Replace the battery cover.
Still if it is not working the software of your Handheld might got corrupted, in this you need to reinstal the software or walk into the service center.
Thank you for using Fixya.

need to adjust Sim tray try putting something to hold it a sticker or tape some small paper.

i want to change the network code of blackberry peral 8100
how i can unloack the phone
IMEI = 355767018968151