I have windows 8 and my mitsubishi cp-D70Dw won't install on my PC... I've downloaded a new driver? Help!!

Mitsubishi D80not told how connected
NO PC told
no OS Told (windows or mac or what) XP to W8 is yes.
no connections told.
when did it last run googe, last week, last year or last decade
real model; this????
CP-D80DW>> color printer?USB cable.?
get the makers software , lost the CD of software ?
windows XP and w7/8 is stated in your manual
using that?
got front panel ALARM LED errors, page 20?
read page 23, what to do before calling for help? do that?
do the cleaning steps

https://www.manualslib.com/manual/774805/Mitsubishi-Electric-Cp-D80dw.html?page=24&term=clean&selected=1#manual


and up to w10 online support from maker. + OXS now.
drivers seen here,
the manual tells how to load that and connect USB last , never first, RTM read how to do that, and then test the printer with new ink.

CP-D80DW

https://mitsubishielectric-printing.com/en/downloads/drivers-tools

I am not familiar with this printer but the error indicates a sensor may not be resetting. Use a flash light to check all sensor flags. make sure they are not broken, missing or stuck. They may be the reason for this error. Your user's and Administraition Guide books should have these errors listed in them. The books may be on the CD that came with your device.

Get Windows 7 Driver from webpage
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/selphy_compact_photo_series/cp_330#DriversAndSoftware

Press on Drivers & Software
Select Windows 7 32 or 64 bits, depending the one you have
Download it and install it

Can't help you with OSX; your printer should work, no idea why it doesn't but then, I don't know much about OSX.

if it new it is new than it is probablely de functioning ans will stop in a few weeks or even days

Hi There
Firstly When You Install A Driver You Have To Edit Screen Res Your Self Some Times. Give It a Try First If It Dont work Id Be Happy To Offer Further Assistance.

Regards

Alex

Why not follow their advice and download the driver ?

There are a lot of issues with drivers based on Windows 8 at the moment. I've also been playing a lot with it lately and have the same issue with my Dell laptop, Intel chipset. My only recommendation is to put Windows 7 back on and wait until late-October when all the manufacturers start releasing compatible drivers.

If you have windows 8 CP/RP installed in your computer and you want to have windows 7 back, the only way is to make a clean install (format) of windows 7. Because Microsoft Windows does not allow downgrading to windows 7 from windows 8.

So grab a Windows 7 DVD or USB drive and make a format.

Hope this helps, Mrityunjay.

Hi, just pull the printer cable from the pc for now and try updating your printer drivers:
Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop. Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done


anaanymous