Jenn air model 720 0061 manuel

Jenn Air are high end and are Secretive with Service Manuals. You need a Service call and a whole load of money. It will be the controller or the board, or crack in the burner element. Even the controller switch is 150 bucks!

https://www.google.com/search?q=Jenn-air+PN+201595D+manual

https://www.appliancepartspros.com/search.aspx?model=c221%20pn%20201595e

..

try national parts depot

or look for new knobs that matches the fit and change the broken one or all of them.

You can buy the part that you need on the link below.

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=24066&diagram_id=877457#d877457

Good Luck and please rate 4 thumbs up for the free answer.

Hello. Work directly with Jenn Air on this. Go to this link which includes a toll free number and a link to IM with their technician, for free.

http://www.jennair.com/flash.cmd?/#/page/customerservice/

I suspect a faulty element or electrical connection to the element.

they make universal knob kits that will work...pull out the bottom pot holder...look for model# on frame

Attach it to white or any ground screw.

just go to http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=JA_EN_US and enter in the model #, you will get the install specs and customer manuel

I have the same model with the same problem. The replacement is simple. Remove the burner cap (no tools needed) Take a large crescent wrench and remove the large center nut holding the burner assembly in place. The ignitor will slide out of the assembly once it is removed. Good luck

Did you find anything out? We have had our Jenn-aire gas stove for 1 1/2 years and just noticed today that the surface has bubbled in a spot??? I did clean the oven last week.