Heat selector switch

hicago Electric Harbor Freight Mig Welder On Off Power Switch Parts.

Clarke Mig Welder 6 Position Heat Selector Switch Parts

I found a heat selector switch, but I don't know if that's what you need. You can do web search for ' heat selector switches' or' mig welder switches'.....

find the round circular disk with 2 wires and white grease buried in the main transformer. should be on the outside of the coil r&r the thermal cut out switch.
the heat switch could also be the heat selector switch on the front panel remove knob remove wires from selector remove shaft nut reverse actions....

You may have an inoperative switch

Where is the clicking noise coming from, the engine compartment or the dash panel? Probably not the heat selector switch, so I'm willing to bet the thermostat is sticking and not opening, which is lesding to you not having heat and the clicking noise you are hearing. Replace the thermostat.

Hi

Please check the things that could stop a electric dryer from heating:
- House fuse or breaker (needs two of them), heating element, burnt wire, thermostat(s), thermal fuse (not all models), motor heat switch, timer, selector switch, burnt power cord/plug.
And also check the things that could stop a gas dryer from heating if you have a gas dryer:
- Glow bar igniter, thermal fuse (not all models), coils on the gas valve, gas valve, thermostats, motor heat switch, timer, selector switch, sensor.

Please do rate the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Hi


Things that could stop a electric dryer from heating:

• house fuse or breaker ( needs two of them )
• heating element, burnt wire
• thermostat(s), thermal fuse ( not all models ),
• motor heat switch, timer, selector switch,
• burnt power cord/plug.

You can check these things using an ohmmeter/multimeter from here.


Things that could stop a gas dryer from heating:

• glow bar igniter,
• thermal fuse ( not all models ),
• coils on the gas valve, gas valve, thermostats,
• motor heat switch, timer, selector switch, sensor.

A page for checking gas dryers is here.


Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

Hi


Things that could stop a electric dryer from heating:

• house fuse or breaker ( needs two of them )
• heating element, burnt wire
• thermostat(s), thermal fuse ( not all models ),
• motor heat switch, timer, selector switch,
• burnt power cord/plug.

You can check these things using an ohmmeter/multimeter from here.


Things that could stop a gas dryer from heating:

• glow bar igniter,
• thermal fuse ( not all models ),
• coils on the gas valve, gas valve, thermostats,
• motor heat switch, timer, selector switch, sensor.

A page for checking gas dryers is here.


Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

Hi

Things that could stop a electric dryer from heating:

- house fuse or breaker ( needs two of them ), heating element, burnt wire, thermostat(s), thermal fuse ( not all models ), motor heat switch, timer, selector switch, burnt power cord/plug.
A ohm meter test for these parts is here.

Things that could stop a gas dryer from heating:

- glow bar igniter, thermal fuse ( not all models ), coils on the gas valve, gas valve, thermostats, motor heat switch, timer, selector switch, sensor.
A page for checking gas dryers is here.

Please do rate the solution as "FixYa" and revert for further assistance.

Thanks
Rylee

Q - My electric dryer runs but will not heat, what could stop my dryer from heating?
A - Things that could stop a electric dryer from heating:
- house fuse or breaker ( needs two of them ), heating element, burnt wire, thermostat(s), thermal fuse ( not all models ), motor heat switch, timer, selector switch, burnt power cord/plug.
A ohm meter test for these parts is here.
Q - My gas dryer will not heat, what could stop my dryer from heating?
A - Things that could stop a gas dryer from heating:
- glow bar igniter, thermal fuse ( not all models ), coils on the gas valve, gas valve, thermostats,motor heat switch, timer, selector switch, sensor.
A page for checking gas dryers is here.