Settings I need to take a photo of at least 300dpi and 500k on FZ35 camera what settings do I use

What is your camera model

Yes, in menu slect image size to small

It's not a camera setting.
DPI is "dots per inch". This only has meaning when the picture is output (usually printed, but also displayed on a screen). You can make two different-sized prints from the same photo file, and they will have different DPI settings even though they come from the same file.
A photo editing/printing program will let you control the DPI when you print a photo (and some will let you change the value when you save the file).

It's not a camera setting.
DPI is "dots per inch". This only has meaning when the picture is output (usually printed, but also displayed on a screen). You can make two different-sized prints from the same photo file, and they will have different DPI settings even though they come from the same file.
A photo editing/printing program will let you control the DPI when you print a photo (and some will let you change the value when you save the file).

It's not a camera setting.
DPI is "dots per inch". This only has meaning when the picture is output (usually printed, but also displayed on a screen). You can make two different-sized prints from the same photo file, and they will have different DPI settings even though they come from the same file.
A photo editing/printing program will let you control the DPI when you print a photo (and some will let you change the value when you save the file).

The DPI (dots per inch) number only has meaning when printing the picture. It's meaningless to a camera.
The M1093IS takes photos that are 3672 x 2748 pixels at its best resolution. If you make a 4x6 print of one, you'll be getting more than 600dpi. If you make a 8x10 print of the same picture, you'll only be getting about 300dpi. Yet they're made from the same image file.
If you must change the image file itself, open it in just about any photo editor, change the DPI field, then save the file. Make sure you do this to a copy, not the original.

Not really, since "300 dpi" is a print resolution specification. The camera takes pictures at whatever resolution you have set (0.3MP to 7.1MP on the A570).

If you print a 0.3MP photo at 300dpi, you'll get a picture 1.6 inches by 2.1 inches (smaller than a business card). If you print a 7.1MP photo at 300dpi, you'll get a picture about 8 inches by 10 inches. You can also get an 8x10 from the 0.3MP if you print at 60dpi, but the result will be rather grainy.

Again, "300 dpi" has no meaning to the camera.

Hi,
Yes your camera will give images with 300dpi . You need to set the dimension as 3264 x 2448.

Hope this helps.

Press menue and ok to access settings. select 3.1MP and press ok.

Hi

There is a really useful item on this very subject here. Hopefully it will offer some help for you

Best wishes