Question about HP D1660 InkJet Printer
I changed the default from Microsoft printer to hp jet pro 8600 printer and it went to pause I have pulled the power plug for a few seconds and nothing happen.tried printing in different ways it goes to the priniter but pause there
Posted by Anonymous on
Please download and run the HP Print and Scan Doctor from www.hp.com/go/tools to resolve the issue.
If issue still persists, let me know if there are any error messages displayed on the printer.
Posted on Apr 04, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
all you have to do is lift the top cover where the toner goes and remove the toner, now when u look inside you can clearly see the white colr spool or roller. This roller due to usage tends to pop up a little, so with one of ur fingers push it down and u will hear a click noise thats it, clean up if u see any dust load the toner back close cover and ur back in business.
Posted on Oct 01, 2008
uninstall your printer and then re-install it that should fix your issue,it could be a bad version of an updated driver that is causing the problem
Posted on Jun 19, 2009
This printer have a problem on HP circuit board. Usually its grounded due to ink waste, or not using it like what you said it took about three months. Here is a tip if your printer HP is still under warranty then you can send or contact to HP Center or the one you buy from it. To be sure that your printer is working back normally.
Posted on Sep 13, 2009
There are 2 fuses inside the power supply unit.
The hard part is getting to the power supply! The power supply is located at the left side of the printer and in the front (the opposite side of the cartridges).
You have to remove the side and top covers.
There are some hidden screws. One is under the button faceplate that you will also have to remove. The entire procedure is tricky especially without a service manual. Unfortunately I couldn’t locate a manual.
Caution always disconnect the power lines and allow some time for capacitors discharge before you attempt any repairs.
I hope you have some luck with yours !!
Posted on Dec 10, 2009
Tips for a great answer:
May 04, 2018 | HP OfficeJet Office Equipment & Supplies
Jun 17, 2015 | HP Officejet Pro 8600
Jun 02, 2015 | HP Officejet Pro 8600
Mar 02, 2015 | HP Officejet Pro 8600
Dec 28, 2014 | HP Office Equipment & Supplies
Oct 11, 2014 | HP Officejet Pro 8600
Jul 13, 2014 | HP OfficeJet Office Equipment & Supplies
Dec 18, 2013 | HP Officejet Pro 8600
Nov 09, 2012 | Office Equipment & Supplies
Feb 08, 2010 | HP Office Equipment & Supplies
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: