I HAVE A LOEWE TV WHEN YOU SWITCH ON A PIN CODE IS ASKED BEFORE GETTING ACCESS TO THE TV

What do you think is locked?

Hi Dean Cooper, Go to This link, and let me know if you solved your problem.

remember to rate me*

I had a similar problem, and I fixed it with my new Sony flat screen by going into the zoom mode and then menu on the tv remote. You can then access settings such as horizontal and vertical and change them so that your screen can adjust. The only way you can access those settings is in zoom mode.

your power supply is defective try to check the regulator.

Tries unplug,replug for awhile for reset,still blink ur main backlight video board it dead,must replaced.

hi! i have here a code for your tv, just try it 1053, hope this helps! goodluck!

Ur power inverter board is dead.
U need a new one.

You will need a reset within the deep switch setting
1) Push the left button on the front panel
2) Navigate to "service"
3) push immediately on tv set from your hand control

A new screen will give you access to all deep switches settings.
Be careful, not all settings must be modified, there is a risk of "instant Killing"
You can find the basic setting recommendations on the Web for your TV set

there must have been a automatic off timer set on ur tv. check the self off timer settings

Could be loss of voltage on secondary or problem on Power supply. Check 4/5 (depnding on chassis) wickman fuses on secondary if none are o/c then replace power supply components with Kit from Loewe. Part number 90415.900.

Should take tv engineer about 1 hour (max) to replace parts form kit.