What type of wrench for flywheel of sinkmaster 401

mnauls on following link:
http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

There should be a screw hole in the very middle of the bottom. It should be a 1/4" or 5/16 hex shaped hole for an Allen wrench.

Insert the wrench into the hole and then move it back and forth Until it spins easily.

Whatever is causing the drum to lock up should be extracted from inside before you run it again.

Be safe when you've got your hand in there.

Following link has troubleshoot resources and step by step:
http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

On the very bottom of the disposal there is a small opening in the very middle of the disposal. If you shine a light under the sink and put a mirror down on the inside of the cabinet you should be able to see this. You'll need an Allen wrench to put in the 6 sided hex hole and turn counter clockwise until the disposal turns freely. This should unjam your disposal. Don't forget you may have to hit the small reset button on the bottom too.

Use broomstick to rotate cutter blade
http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html
Use broomstick
Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Replace disposal:
http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html

Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Push reset button located bottom of disposal? Use broom stick and rotate stuck cutter disk?
Copy following link to troubleshoot by type of problem:
http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html
Titan appears to be repackaged sinkmaster garbage disposal.
There is no service manual or installation manual on brief web search. However link above has manuals sinkmaster and other brands .
Add a comment and say what you discover

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Splash guards are sold by brand name, but many brands simply repackage more famillar brands such as sinkmaster or insinkerator:
http://waterheatertimer.org/How-to-repair-and-install-Garbage-disposal.html
Add a comment as needed

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7