Hi! Have had our Asko for several years & has always worked fine. Now it will not fill with water. Everything works as before, the power is on, the water line is fine, the door closes, the push start button clicks, but then there is no water fill, & no action at all. Would greatly appreciate any & all input! Thank you so much! :0)
The carbon brushs in the motor need replacing,on the w6021 the fault you get is a clicking sound when you press the start button.
922 views
Usually answered in minutes!
I have the same washer and but it fills up with so little water my clothes are damp but barely washed after a full cycle and still full of detergent.
In the beginning I was fooling around with the washer and opened the little compartment in the bottom front of the washer and twisted a knob off ... a bunch of water leaked out before i put the knob back on ... is that bad? did that cause the water level in the washer to drastically be reduced?
Machine worked fine for 4 1/2 years but stopped working.When the start button was pushed the machine clicked and then nothing.I bought a new circuit board for $240.00 and the machine worked for one wash only and now back to the same problem.Could'nt get any info out of Asko they want me to take it to their authorised service man.
When i press start on my washer i can usually hear the water start running.. Now when i press start nothing happens.. The door is shut and on correct setting
×