DYNEX WONT FIND CHANNELS - Dynex DX-L26-10A 26 in. HD-Ready LCD TV

Try taking batteries out of remote

Most TVs have a way of changing the channels manually. One of the buttons on the device will change the channels up or down.

Yes all over the air channels are now digital. Make sure that your TV is on the correct source. You can get a decent converter box at Walmart for around 20 to 50 dollars

If you need further help, I’m available over the phone at https://www.6ya.com/expert/aaron_a0d6f580814d28b2

Dynex 24 inch Class LCD 1080p 60Hz HDTV DVD Combo

Choose your manual here

You may be required to have a cable box depending on your provider to get higher channels. Contact your service provider for assistance.

Hi I Just Bought A Dynex 32 Inch HDTV. I Did A Auto Scan And It Didnt Pick Up Any Digital Channels? Am I Suppose To Have An Antenna Or Digital Box? How Do I Get Th Channels To Come In?

Use component cables instead of the HDMI cables. We had the same problem and that's how the cable guy fixed it. You use just the regular red, white, and yellow cables then the other 3 colors that are just for HD tvs.

You can go to the Dynex customer support website at (http://www.dynexproducts.com/pc-694-23-dynex-19-720p-widescreen-flat-panel-lcd-hdtv.aspx)This is the support page for you model television. Just copy the address and paste it into the address bar of you web browser. The page has a pdf copy of the manual that you can copy. It also has access to the customer support technical service using the e-mail support. You can also call Dynex customer support at this telephone number 1-800-305-2204 between the hours of 7am - 12am CST. Give them the model number of your television and ask them for help with you set-up problems. I hope this information helps you with your problem.