Remove bizhub 250 finisher - Minolta bizhub 250 Black and White Copier

when toner finished than show add toner

This problem on finisher.Please unplug the the finisher than fix it

do you have a finisher?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc

try this

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

You can drop the toner cover and cheat the door sensor and watch the toner bottle to see if it spins or not. If it doesnt spin- the end result is not good especially if you have a grinding noise. or just the toner bottle not spinning and it asks to replace toner. The back of the machine will have to come off. You will have to remove all the covers and finisher off the front. Then get to the toner add mechanism and take it out. The one gear will probably be sideways because- if the customer put the toner in wrong or maybe the wrong toner in- it will bind and bend that back shaft. thereby screwing it up. It takes a lot of time and parts. First thing you need to do though- is to see if the bottle is spinning or not

to remove code "COF32" from your machine, simply change the developer with the new one. code will remove.
wish you best of luck............

the staple unit is located in the finisher where the paper is stacked,check on the top or on the side for a compartment door that pops open. You should see a clear plastic cartridge that slides out where another one can be replaced

C-1183 - Finishing option elevator drive malfunction

Use the "Separate Scan" button on the panel. By pushing this you are telling the scanner that you have separate scans to scan as one document. Once all files are scanned, push the separate scan button again to indicate you are finished scanning.

put finger in power socket