How to print from Excel on Zebra Z4M Printer?
SOURCE: zebra z4m plus printer has no display showing
We had a computer tech change the CMOS battery inside the printer and the display starts to work again.
SOURCE: Zebra Z4M plus, I am not able to print labels
Turn the printer off. Turn it back on again. Restart the computer. Restart SAP. See if that makes a difference.
SOURCE: Zebra LP2844 printer prints garbage
Sounds like you might be using a bad driver, or the printer is in dump mode.
Try hitting the green button and see if it says exiting dump.
If still having trouble, inside the printer it tells you that if you are having printing trouble:
This process re-reads the label length (so only do it with the labels you want to use in, or it will waste labels until you do it again with those in it) - but I'm suggesting it only because it enters and exits dump mode (which I have read can cause the garbage when you try to print).
SOURCE: Zebra Z4M printer error
The mainboard does not need to be replaced, just the sensor head open is dirty and needs cleaned.
SOURCE: Slow Printing on Zebra Z4M
An unorthodox solution is to install an old driver. Another solution is to use with Codesoft the driver from www.seagullscientific.com, and with Zebra Designer, the Zebra Designer driver. If the printer is connected to the serial port, speeds up communication.
Roberto Martinez
143 views
Usually answered in minutes!
×