My Tasco model 304 is missing the screw on cover/spacer/protector on one eye piece. Can these be acquired, and if so where from
Ebay has them under telescope eyepiece catagory
SOURCE: The main eye piece is missing the lens.
yes you can..most brands of telescopes will fit others as far as eyepieces go..so if you call bushnell@18004233537 im sure they can help...good luck....... [email protected]
SOURCE: missing parts ? re Tasco 302048
Probably -- the 4mm gives too much magnification for you telescope-- difficult to focus or find thing in the sky-- you should also have had an eyepiece somewhere between 17mm and 24mm for lower power viewing.
SOURCE: Hi I have a Tasco 302045 the eye piece lenses are
You will not be able to get parts from Tasco-- however many things can be repaired with parts from a well stocked hardware store.
Rather than trying to fix a broken eyepiece look at this web site from some low cost plossel style eyepieces -- not very expensive. You need a 20mm and a 12 mm.
SOURCE: missing parts to galaxsee tasco
eye pieces are interchangeable and you will want a few of them for different magnifications.
The previous owner probably got a new scope and kept them for that.
Here's where I go for lens' in Toronto Canada.
http://www.escience.ca/telescopes/RENDER/5/2022/1052/W1052.html
The rule of thumb is cheaper eyepieces are ok for the low magnification 35mm-20mm but as you get to higher magnification a better eyepiece will make more of a difference. How expensive is up to you and how serious you are into this. I think my better lens was a used tele-vue for $80
SOURCE: I recently obtained a TASCO 30-060402 telescope
Measure the hole on the telescope diagonal. Eyepieces come in .965, 1.25, and 2 inch sizes.
Many on-line retailers sell them here is one:
http://agenaastro.com/
124 views
Usually answered in minutes!
×