What does fl mean - Sony BDP-S300 Blu-Ray Disc Player

Unimac Washer Product Support ' ManualsOnline.com

laundry.manualsonline.com/support/unimac/washer/

Unimac Washer uw60b20u80001. 0 Solutions ... on start up unlock door light stays on.display sa. Unimac ... washer has falt code E FL what does this mean and.

E fl error code on industrial uni Mac washer. What's it mean ...

www.fixya.com/support/t20744713-e_fl_error_code_industrial_uni_mac

Means full...your fully charged

FL Float Charging.

The FL error code means:
Flood Condition:
FL flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lack condition in order for FL to be displayed

With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit.

Press STOP/CANCEL to clear the display.

This problem I see on these are the water pumps getting clogged with lint or other things, causing the pump not to pump all of the water out at times.

There is a check "valve" in the drain assembly that seems to sometimes cause problems with the FL error code. You can remove this piece, and might avoid changing the pump.

Calypso Service manual: https://docs.google.com/leaf?id=0B5If-wTgYWH5MTQ0OGIxZTAtZjQyMy00MzEzLWJkMzYtZTdmOTY2OTk3YTA4&hl=en

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Once you get to the manual search it for "FL 2". There is a trouble-shooting chart near the back of the manual that addresses FL 2 issues.

FL means the door Locking Mechanism has failed. It will need to be replaced.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

FL means that the full amount of space on the card is available...it doesn't give you an amount like say the d70 which says you have , say, 1.1K available of space...the d21x goes in reverse and starts counting how many pics you have taken...the FL becomes a number at 99 and goes down from there depending on how many pics you take.So you then end up with a number on top instead of FL and a number below indicating how many pics you have taken.

Hope this helps.

FL means change filter media