The bottom element in the bottom oven doesn't heat. I replaced the element but still doesn't heat up.
Phil. If you do not have voltage at the element, then the Electronic Oven Control ( EOC ) has failed. Part number # 5701M403-60
In order to check for the correct voltage at the element you will need to remove power and pull the range out of its installed location and remove the back panel of the range to gain access to the wiring and element. CAUTION ! I cannot stress this enough ! There are dangerous voltages in this area!! After the panel has been removed, return power to the range,set the lower oven to bake, and check the voltage at the element. You should find 220-240 volts between the element terminals with them connected to the element. If you do not have the proper voltage then you will need to replaced the EOC.
SOURCE: Maytag MER6772 - Oven bake element not working even after replacing it.
replaced bottom element in oven , now neither element works ?
SOURCE: bottom element in oven not working
Bake element
Most times it is easy to see a failed oven element. Their will bea hole or a welded mark somewhere on the element where a piece ofcheese fell on it and caused a hotspot. You can also check elementswith a meter or simply apply some wall current to them using a cheatercord to see if it gets warm. If the element gets warm that means itwill work and is not bad. If the element ain't coming on but you havechecked it out, of course then that would be the thermostat.
HEADS UP: When fooling with the stove always be sure the power isoff. Pull out the bottom drawer and most of the time you can unplug thepower cord without moving the stove. To make it easier to work on most stoves the oven door can beremoved. I set the door at the broil position and gently ease up on thedoor, remove it, and set it to the side.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
SOURCE: Oven will not heat
Hello, your problem is going to be a bad igniter. you should replace it. Good luck! Mike
SOURCE: Baking Element Caught fire
funny same thing just happened to me and it all seams to be the bottom element of the same ovens around the same year, I bought mine in 99 also, I keep my oven very clean becasue i know the dangers it may cause, I think this is a major problem and it needs to be addressed.
SOURCE: Maytag Gemini bottom oven not working
both ovens on my new stainless steel maytagmgr6775 not heating up.............
425 views
Usually answered in minutes!
×