Starts inconsistently. Power button always turns on but the start button flashes and beeps. Then the power button needs to be turned off, then turned back on and then the start button again. It often takes several tries to get it started.
Richard, it could be a unresponsive control to reboot the unit unplug power cord from wall a couple of min's and plug back in. I would ask if you are gently holding start button in until you here a click then release the button. as the start button is depressed it is a time process to enable to processor to think... let us know.
SOURCE: Whirlpool Duet Washer GHW9150PW0
THE ERROR MESSAGE IS dLF THE WASHER WILL CLICK 4 TO 5 TIMES THEN IT WILL BEEP AND DISPLAY THE ERROR CODE. WHAT DOES THIS MEAN??
SOURCE: whirlpool duet sport washer 3.6 WFW8410SW cycle will not start
set it to spin dran cycle and select no spin and push the rinse hold button 4 times it should read c00 on the dis play and go thew to c08 it will lock the door frist and then go thew all the cycles it will flash on a c# that has trouble
SOURCE: Cabrio washer want start.
leave the door open and try it again if it does the same thing as before the door lock has gone
SOURCE: Whirlpool AWM 8143 - Starts a cycle and then
This is either a problem with the door lock itself or most probably a motor failiure as the door open light also indicates some kind of motor problem. If your appliance is 4/5 years and above then you will most likely need to change the set of carbon brushes on the motor and this will solve your problem
238 views
Usually answered in minutes!
Hi Richard Carroll, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
Need the complete model number. how many flashes does it lights?. that will tell you what kind of error to look for.
×