Canon Pixma iP2600 Photo InkJet Printer Logo

Related Topics:

A
Anonymous Posted on Apr 29, 2014

Canon pixma green power lamp and alarm lamp flashing

5 Related Answers

Anonymous

  • 88 Answers
  • Posted on Apr 09, 2008

SOURCE: alarm light wont stop flashing

How old is your printer? Maybe a part in your printer has reached its service life and has to be replaced. Please indicate error messages if there are any.

Ad

Anonymous

  • 787 Answers
  • Posted on Nov 05, 2009

SOURCE: Power Lamp Flashes Green and Alarm Lamp Flashes 7 TIMES

Count how many times blinks orange lamp and check this error in this forum.

Anonymous

  • 1 Answer
  • Posted on Dec 29, 2009

SOURCE: error b200, green and orange lamp flash

orange light blinking 

pineworks

Clive

  • 4362 Answers
  • Posted on Feb 16, 2010

SOURCE: Canon Pixma MP140 freezes, only alarm lamp is on, no code error

  • Turn off the canon printer

  • Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.

  • Hold the Power Button, release the Resume Button.

  • Not releasing the Power Button, double click “Resume” and release Both Buttons.

  • Click “Resume” for Four times

  • Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
  • Anonymous

    • 518 Answers
    • Posted on Jul 06, 2010

    SOURCE: service error 6000 canon pixma

    in the book at the back is normaly the error codes

    Ad

    Add Your Answer

    ×

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    0helpful
    1answer

    Paper won't feed in my Pixma MP 530, and I get a flashing alarm.

    You need to tell us in what is the sequence the orange and green lamps flash. This will tell us what error you are getting. its more accurate than any error code given by the pc.
    0helpful
    1answer

    Eror p2

    the web address for the manual is "http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp250#BrochuresAndManuals"
    look for this document "mp250sosmwin110us.exe" install it and then look for the "troubleshooting" on the right side of the window and follow the instructions. the path is (MAIN WINDOW) >

    Troubleshooting
    >

    An Error Code Is Displayed on the LED
    >

    Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately
    (go down the page until it says: Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately )> then look for the error code. good luck!!sorry, the system is printing the same font as the book.

    0helpful
    2answers

    7 orange flashes and then one green..what does that mean?

    7 orange flashes of the alarm lamp means that FINE cartridge is not installed in the correct position. Confirm that the FINE Cartridges are installed in the appropriate positions.
    Please refer to the link below to see document on replacing FINE cartridge http://support-ph.canon-asia.com/contents/PH/EN/8200182600.html
    The link below gives you information regarding Causes and Solutions when Alarm Lamp Flashes Orange http://support-ph.canon-asia.com/contents/PH/EN/8200187300.html#5
    7helpful
    1answer

    Canon Pixma MP140 freezes, only alarm lamp is on, no code error

  • Turn off the canon printer

  • Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.

  • Hold the Power Button, release the Resume Button.

  • Not releasing the Power Button, double click “Resume” and release Both Buttons.

  • Click “Resume” for Four times

  • Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
  • 5helpful
    1answer

    Power Lamp Flashes Green and Alarm Lamp Flashes 7 TIMES

    Count how many times blinks orange lamp and check this error in this forum.
    0helpful
    1answer

    Power and alarm lamp lit error code e 3 flashes indicating a paper jam but no paper is jammed power flashing green 3 times then stays green and alarm lamp flashers orange three time then gos off over and...

    Try a hard reset first - Unplug printer from AC power source for a minutes and from PC. After a minute, reconnect everything and power up and see if it works..
    0helpful
    1answer

    E2 power lamp flashes green and alarm lamp flashes yellow

    compatible cartridges don't work i have 180 pixma canon and the alarm light yellow
    no dessapear and the printer no work

    what i can do
    than you

    JUan
    Not finding what you are looking for?

    57 views

    Ask a Question

    Usually answered in minutes!

    Top Canon Office Equipment & Supplies Experts

    old marine
    old marine

    Level 3 Expert

    2426 Answers

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Cindy Wells

    Level 3 Expert

    6688 Answers

    Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...