This might take some doing reseting the fs 1118 but it can be done if the fuser only got hit by a powersurge or overheated due to paperjam by the fuser...
press system menu/counter
select service settings via up and down cursor keys
now while pressing start key and # key press enter
then select maintenance mode by using the up down cursor key
press enter
enter 163 and then restart the copier...
sometimes you wont even be able to get to the service mode...
open the front of the copier and then execute the steps... the front meaning the area where you the toner is located...
trying keeping it open and do the steps...
if that fails then open it take out the toner drum cartridge and then put it back in...
then do the steps...
if it still doesn't take try it a couple more times...
if it still doesn't take.. buy a new fuser...
but it should take... it just takes a little experimentation...
I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d
AFTER entered the 163 digit i cant able to execute opeataion. what can i do now?
which means i cant restart the copier. can anyone help me here?
THANKS SO MUCH, IT IS WORKING NOW
Please help me, I am pressing on the execute but nothing is happening. Help me please
×
This is a fuser fault, blown lamp, blown thermal fuse or a faulty thermistor.
The fuser unit needs to be replaced
5,841 views
Usually answered in minutes!
×