Power to socket is on. Disconnected plug from socket for a few minutes. Plugged back in and nothing. No response to pressing Power button.
SOURCE: Fisher and Paykel Washing Machine
Assuming that the machine was unused for a period of time , please allow to have the washer plugged on to remove any traces of moisture on the machine's circuitry while it was in transit.
Also if there was any corrosion in the motherboard as it was off circuit for a long time, this might happen.
If there is no result after keeping it ON for several hours, Unplugging and resetting once again then the main controller board , connectors and wires must be checked for possible damage during transit.
It will be good to have the set removed out , looked into carefully for any such breakages, reconnect all the wires to notice any change.
Please try these tips and respond.
195 views
Usually answered in minutes!
×