Control panel does not respond MFD2561HEW

If your Indurama 5 burner's touch panel is not responding accurately when you try to turn on or off the light, fan, or rotisserie, it is possible that there is a problem with the touch panel itself or with the connections between the touch panel and the burner's control board. Here are some steps you can try to fix this problem:

1. Clean the touch panel: If the touch panel is dirty or dusty, it may not be able to accurately detect your finger or stylus when you try to touch it. Try cleaning the touch panel with a soft, dry cloth to remove any dirt or debris that may be interfering with its operation.
2. Check the connections: Make sure that the touch panel is securely connected to the control board, and that all of the wires and cables are properly connected and not damaged. If any of the connections are loose or damaged, it may cause the touch panel to not work correctly.
3. Restart the burner: If the touch panel is still not responding accurately, try restarting the burner. To do this, unplug the burner from the power outlet and then wait a few minutes before plugging it back in. This may reset the touch panel and fix any temporary glitches that may be causing the problem.

If these steps do not fix the problem, it is possible that there is a problem with the touch panel itself or with the control board.

If the copier works but the touch display won't respond, you will need to have the touch screen panel overlay replaced. That is a very common problem that happens to those touch displays

follow this steps and fix it. God bless you

Touchpad and Control Panel

If the buttons don't work on the control panel the entire touchpad and control panel assembly may need to be replaced. If the display works but the dishwasher functions are all out of synch, or some of the buttons don't respond properly the entire touchpad and control panel might need to be replaced.

Touchpad

If the buttons don't work on the control panel, the dishwasher touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.

Main Control Board

The dishwasher has a main control board which regulates nearly every function in the dishwasher. If the control panel buttons don't work, and other causes have been ruled out, the main control board might need to be replaced.

I think you still have warranty, it sounds you have faulty control panel, even if it's new does not mean it is good.

follow this steps and fix it. God bless you

Touchpad and Control Panel


If the microwave buttons don't work the touchpad and control panel assembly are probably defective.
Touchpad


If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
User Control and Display Board


If the microwave buttons don't work the user control and display board are most likely defective and will need to be replaced. If some of the buttons work and some don't, it is more likely a touch pad problem and the touch pad will need to be replaced.
Main Control Board


If the microwave buttons don't work the main control board is most likely defective and will need to be replaced. If some of the buttons work the touch pad is likely the problem. If none of the buttons work the problem may be in the main control board.

I have a Miele G2830sci dish washer since brand new, used twice a week in a domestic environment. I am very dissatisfied with this dishwasher because the front control panel (touch screen, no buttons) became unresponsive after six years, outside the warranty. I had the panel replaced (part was AUD$290 and labour/callout fee $210) and the dishwasher was working properly again for another 3 years. Now the same issue is appearing again. I believe that these control panels only have a relatively short lifespan relative to the other parts of the machine. The touch pane becomes unresponsive, or erratic to respond to your touch when the panel is warm, typically towards the middle or end of the cycle when the hot wash or drying is occurring. The panel would be OK when cold. But give it enough time and even when cold, it would no longer work properly. It looks like this panel only has a short useful working life relative to the rest of the machine, based on my direct first hand experience. Not good.

Hello, Thank You for using FixYa. I will be helping you today. Your water tank is frozen! Itson the back wall of the fresh food section if you look behind the drawers you will see it. Use a hair dryer and heat it untill you get water out of the dispenser. This is a common issue with this model.
Thank You and please rate my answer if it was helpful..

If nothing works, it sounds like you didn't get the cable inserted properly. It should fit into a connector which carries signals to the microwave's control components. These connectors usually pullup, you insert the cable, and push the connector back down.

You have a bad relay. Replace relay and in the meantime use the breaker. You might have a spare relay in the box. Look for a relay without any wires hooked to it

Usually, the F1 means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled, replace the oven control (also called clock or ERC), touch pad, or both.

I recommend a service call for this repair.