How do I enlarge a photo on my i pad? I pinched swiped and no luck

Update the software patches to the latest version

Swipe the divider to the edge of your display and it will remove that half of the screen.
If you happen to have an overlay you can move the overlay off screen and it will disappear.

swipe your finger from top down

The photos can be deleted by opening the yellow "My Files" box shaped icon that you can view by swiping the touch screen from right to left and then swiping from top to bottom until you get to the letter M list of apps. Tap on the My Files icon and then tap images and then camera. Tap on the box next to the photos that you want to delete so that you see a green tick. Then tap on the dustbin icon and delete the selected photos.

Click on the "Photos" tile to open the viewer and then click on "Camera Roll". Open the photo you wish to delete and then swipe up from the bottom of the screen to reveal the menu. "Delete" is one of the available options.

I'm not sure if it has the same function as the nexus 7.. When the '7' blocks you press the power button andfor about 20 seconds and it switches off and resets itself. ( nothing ventured?)

Try a system reset using a pin.

To delete a photo, go to your Pictures Library. Find the photos you want to delete. Then, just lightly touch the photo and swipe your finger down a little. This will select that photo, you will see a check in the upper right corner of the photo if you did it right. You can continue to select as many photos you want in this way. You will see the option to Delete at the bottom of the screen as soon as you select the first photo. To deselect the photo, just swipe it down again.

To delete a video, go to the Videos folder located on your Desktop and open it up. You can then select each video like you did for the photos. To unselect it, just touch the check mark which is on the top left corner. When you have finished selecting all the videos you want to delete, just click on the big red X on the top toolbar.

One note though - my directions are based on Windows 8.1, so make sure you have installed all your updates.

Hope this helps!
John

idk

Hi, You need to go into your printers properties to change the sizes.
If you have your manual read how this is done. If I was there I could do this for you. Good luck.